Product Details
The ABB NE810 3BSE080207R1, also cataloged as the NE810 Managed Ethernet Switch, operates as a dedicated hardware component for high-speed packet routing and network redundancy within ABB automation networks. The unit processes traffic across 8 Ethernet TX 10/100 ports and 2 dual-rate 10/100/1000 Mbit/s SFP slots, executing Fast Recovery of Network Topology (FRNT) ring reconfiguration to maintain deterministic data flow across industrial control architectures.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | NE810 3BSE080207R1 |
| Brand | ABB |
| Origin | Standard ABB Manufacturing Operations |
| Product Type | Managed Industrial Ethernet Switches |
| Switch Architecture | Layer 2 Managed Switch |
| Ethernet TX Ports | 8 x 10/100 Mbit/s ports |
| SFP Ports | 2 x 10/100/1000 Mbit/s SFP slots |
| Redundancy Protocol | FRNT (Fast Recovery of Network Topology) |
| Operating Voltage | 19 to 60 VDC redundant dual input |
| Rated Current | 240 mA @ 24 VDC, 120 mA @ 48 VDC |
| Operating Temp | -40 to +70 deg C |
| Dimensions | 52 mm x 100 mm x 101 mm (W x H x D) |
| Net Weight | 0.7 kg (1.54 lbs) |
| Protection Rating | IP40 metal housing, G3 conformal coating |
| Certifications | Marine DNV, EN 50581:2012 RoHS, WEEE 2012/19/EU |
Backplane Bus Communication Velocity and Deterministic Networks
The managed switch routes data frames between distributed I/O racks and supervisory systems, supporting optimal backplane bus communication velocity across connected network nodes. By maintaining low latency forwarding and deterministic prioritization for Profinet and EtherNet/IP deterministic networks, the module prevents network congestion. Firmware flash compatibility across the onboard management system ensures steady protocol conversion, VLAN tagging, and fast FRNT link failover.
Frequently Asked Questions
Q: How does the redundant power input operate on the NE810?
A: The switch accepts dual 19 to 60 VDC power feeds via detachable screw terminals. If one DC supply fails, the internal diode logic switches power draw to the secondary supply without interrupting switch operation.
Q: What network recovery times does FRNT technology provide during a link fault?
A: FRNT ring redundancy reconfigures network topology paths in milliseconds following a cable break or port disconnection, maintaining continuous data transmission.
Field Installation Guidelines
- DIN-Rail Mounting: Snap the integrated rear DIN-rail clip firmly onto a standard 35 mm DIN rail inside the panel enclosure to ensure mechanical stability.
- Power Wiring: Connect primary and secondary 19 to 60 VDC power leads to the detachable screw terminal block, observing correct wire polarity.
- Cable Shielding: Use shielded twisted-pair (STP) Ethernet cables and ground the shield at the RJ-45 connector or chassis ground lug to dissipate high-frequency electrical noise.
- Thermal Management: Maintain at least 50 mm of vertical clearance above and below the metal housing to allow free air convection in -40 to +70 deg C operating environments.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Layer-2 vs. Layer-3 Network Switches in Industrial Control Systems
Modern factory automation relies heavily on robust Industrial Ethernet communications. Control system engineers deploy managed Ethernet switches to connect programmable logic controllers (PLCs), distributed control systems (DCS), human-machine interfaces (HMIs), and field I/O devices. Selecting between Layer-2 and Layer-3 switching architecture directly impacts network throughput, routing capabilities, and overall cybersecurity defense in operational technology (OT) networks.
Understanding OpenTelemetry in Industrial Automation: Architecture, Observability, and Operational Benefits
Modern industrial control systems (PLCs, DCS, edge nodes) are rapidly adopting cloud-native architectures, generating vast operational data. OpenTelemetry offers an open-source framework that unifies metrics, logs, and execution traces, enabling standardized observability across industrial automation and IT systems.
Mastering Functional Safety Terminology in Industrial Automation
In modern process control and factory automation, managing operational risk is a top engineering priority. High-speed machinery, high-pressure vessels, and continuous processes present constant hazards to personnel and equipment. Modern plant operations rely heavily on functional safety strategies to mitigate these risks. This guide breaks down the essential functional safety terminology that every control systems engineer should master.