Product Details
The ICS Triplex PS01-A, also cataloged as the PS01-A Power Supply Module, operates as a dedicated hardware component for power distribution within ICS Triplex Trusted safety instrumented systems. Accepting a nominal 24 VDC input and delivering a regulated 24 VDC output, this unit powers critical processor chassis rails and expansion backplanes across an operating temperature range of -40 to +85 deg C (-40 to +185 deg F).
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | PS01-A |
| Brand | ICS Triplex |
| Origin | United Kingdom |
| Weight | 6.5 kg (14.33 lbs) |
| Dimensions | 112 mm x 70 mm x 123 mm |
| Operating Temp | -40 to +85 deg C (-40 to +185 deg F) |
| Storage Temp | -40 to +85 deg C (-40 to +185 deg F) |
| Humidity Range | 10% to 90% RH non-condensing |
| Power Consumption | Passive Power Conditioning (Internal Dissipation Dependent on Load) |
| Input Voltage | 24 VDC |
| Output Voltage | 24 VDC |
| System Compatibility | ICS Triplex Safety Instrumented Systems (SIS) |
Functional Safety and Triple Modular Redundancy
The ICS Triplex PS01-A power supply module is engineered to support SIL3 certification requirements in high-integrity automation systems. Integrated within a triple modular redundancy (TMR) 2oo3 architecture, the module incorporates robust galvanic isolation between primary power input terminals, system logic circuitry, and chassis earth ground. Internal fault-detection diagnostic logic monitors input/output voltage levels continuously, driving the power bus into a defined fail-safe state execution upon detecting persistent over-voltage or under-voltage conditions without disrupting parallel active power channels.
Frequently Asked Questions
Q: Can the PS01-A power supply module be hot-swapped while the system is actively operating?
A: Yes, in dual or N+1 redundant power chassis configurations, a faulted PS01-A module can be unseated and replaced without shutting down power to the system backplane logic.
Q: What is the primary purpose of internal galvanic isolation within the PS01-A unit?
A: Galvanic isolation prevents field-side electrical surges and ground loop currents from propagating to the main processor backplane, maintaining system safety integrity.
Field Installation Guidelines
- Slide the PS01-A module into the dedicated power supply chassis slot along the guide rails until fully seated.
- Engage and tighten top and bottom module retaining screws to secure mechanical grounding to the rack chassis.
- Wire the 24 VDC primary power supply leads to the designated screw terminals, observing strict polarity matching.
- Connect the main protective earth (PE) grounding conductor to the chassis earth terminal using heavy-gauge wiring prior to energizing the module.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Managed Switch vs. Unmanaged Switch: Industrial Ethernet Architecture
Hot Standby vs. Cold Standby Redundancy in Industrial Automation
System availability determines process safety and productivity in industrial automation. Control engineers deploy redundancy to eliminate single points of failure. This technical guide evaluates Hot Standby vs. Cold Standby architectures, comparing failover speeds, memory sync, cost trade-offs, and field selection criteria.
