Product Details
Configured for field signal connection and module interlock routing in Freelance AC 700F controller racks, the ABB TU 710F 3BDH000398R0001 (TU710F Terminal Unit) provides direct physical/electrical execution. The hardware assembly features spring-type connection terminals alongside a 9-pin Sub-D interface to route fieldbus protocol communications and 24 VDC auxiliary power across plugged functional modules.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | TU 710F 3BDH000398R0001 |
| Brand | ABB |
| Origin | Global Manufacturing Facilities |
| Weight | 0.14 kg (Net) |
| Dimensions | 68 mm x 0 mm x 28 mm |
| Operating Temp | Standard Industrial Operating Range |
| Power Consumption | Passive Base Terminal Draw (24 VDC Nominal) |
| Connection Type | Spring-type Terminals, 9-pin Sub-D Connector |
| Module Designation | TU 710F Bus-Terminal Unit |
| System Compatibility | AC 700F Control System Series |
Backplane Bus Communication Velocity & I/O Density Scaling
The TU710F terminal unit forms the structural and electrical backbone for sub-rack I/O expansion, sustaining backplane bus communication velocity across attached fieldbus communication modules. Its compact design optimizes cabinet I/O density scaling while spring-type terminals reduce connection impedance during high-vibration operation. Full firmware flash compatibility is maintained across swapped functional units without disrupting existing backplane routing paths.
Frequently Asked Questions
Q: How does the TU710F facilitate hot-swap replacement of attached functional modules?
A: The TU710F remains permanently wired to the DIN rail, allowing attached fieldbus or I/O modules to be unplugged without disconnecting field wiring or interrupting backplane bus continuity.
Q: What conductor termination technology is implemented on the TU710F?
A: The unit utilizes spring-type clamp terminals for field power and signal connections, providing constant tension against thermal expansion and vibration.
Q: Does the TU710F supply power directly to connected modules?
A: Yes. The terminal unit distributes 24 VDC field power and backplane signals directly to the plugged-in AC 700F module via rear connector buses.
Field Installation Guidelines
Perform the following technical steps during panel assembly and wiring:
- DIN-Rail Mounting: Hook the TU710F unit onto the top edge of the 35 mm DIN rail and press downward until the locking latch snaps into place.
- Spring Terminal Wiring: Insert a standard screwdriver into the spring release slot, push ferruled wires into the terminal opening, and release to secure clamp engagement.
- Sub-D Cable Termination: Align the 9-pin Sub-D fieldbus connector with the front port and tighten retaining screws to 0.4 N-m torque.
- Ground Bus Bonding: Connect the terminal unit grounding point to the cabinet copper ground bar using a short, low-impedance conductor strap.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Mitigating Emergency Stop Spurious Trips in Industrial Control Systems
Emergency stop (E-Stop) pushbuttons serve as vital safety devices in factory automation and process control plants. Functional safety standards mandate normally-closed (NC) contact blocks to ensure fail-safe operation during wiring breaks or power outages. However, mechanical degradation over time can trigger unexpected spurious trips, halting production lines without an actual emergency. Understanding the underlying causes of mechanical contact failure allows automation engineers to implement robust, fault-tolerant safety circuits.
Redundant Automation Systems: Maximizing Uptime in Critical Control Applications
Industrial automation relies on continuous operational stability to prevent catastrophic downtime and financial loss. While standard dictionary definitions treat redundancy as superfluous, industrial engineers consider redundant control architectures indispensable for high-availability systems. Implementing backup hardware ensures seamless takeover during primary equipment failures, protecting critical infrastructure across manufacturing and process industries.
Demystifying the 5 Levels of Industrial Automation Architecture
Modern manufacturing relies on structured communication hierarchy to bridge physical shop-floor hardware with enterprise management software. This framework, commonly known as the Automation Pyramid, establishes how data flows between field devices, logic controllers, and corporate IT networks. Understanding these five distinct levels helps engineers and plant managers optimize system operations, reduce downtime, and implement seamless factory automation solutions.