Product Details
The ABB CCF10 2MBPS, also cataloged as the CCF 10 Coupling Module, operates as a dedicated hardware component for protocol conversion and serial data transmission within ABB control and automation networks. The unit manages physical layer signal coupling over a Modbus interface at speeds up to 2 Mbps, facilitating high-speed data frame transfer between controller racks and remote field devices.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CCF 10 2MBPS (Product ID: EXC788713-2) |
| Brand | ABB |
| Product Type | Communication Modules |
| Communication Interface | Modbus Interface |
| Baud Rate | Up to 2 Mbps |
| Net Weight | 1.2 kg |
| Gross Weight | 1.2 kg |
| Operating Temp | 0 to +60 deg C (standard panel ambient) |
| Power Consumption | Powered via backplane bus connection |
Backplane Bus Communication Velocity and Firmware Flash Compatibility
The coupling module integrates directly with the system rack backplane, leveraging high backplane bus communication velocity to route Modbus registers without introducing transmission latencies. Inter-module communication frames sync deterministically with external Profinet or EtherNet/IP deterministic networks through host gateway processors. Onboard firmware flash compatibility ensures stable register mapping and parity bit synchronization across various system firmware revisions.
Frequently Asked Questions
Q: Does the CCF10 module require dedicated external power wiring?
A: No, operating power is drawn directly through the rack backplane connector when properly seated in the subrack chassis.
Q: What transmission rate is supported on the Modbus communication link?
A: The module supports data transfer rates up to 2 Mbps over the dedicated Modbus interface.
Field Installation Guidelines
- Module Slot Insertion: Align the CCF10 circuit board with the guide rails of the chassis rack and push firmly until the backplane connector fully seats.
- Fastening: Hand-tighten top and bottom panel retaining screws to secure mechanical alignment and establish chassis earth ground.
- Cable Termination: Ensure RS-485/Modbus serial lines utilize proper end-of-line termination resistors to suppress transmission line reflections at 2 Mbps signaling rates.
- Shield Grounding: Connect communication cable drain wires to the designated panel earth terminal to prevent high-frequency noise interference.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Comprehensive Guide to Instrumentation and Control (I&C) Design Basis
Instrumentation and Control (I&C) Design Basis serves as the foundational technical document for modern plant engineering. Project teams rely on this master specification to govern engineering deliverables across front-end engineering design (FEED) and detailed execution phases. A well-constructed I&C design basis ensures seamless integration among field instrumentation, safety systems, and main control systems. Furthermore, establishing clear technical standards early mitigates execution risks and prevents costly re-engineering during plant commissioning.
The Shift to Flexible IO Modules in Modern Industrial Automation
Traditional control systems rely on dedicated Input Output (IO) cards for industrial automation. Each conventional module processes a single signal type, such as Digital Input (DI), Digital Output (DO), Analog Input (AI), or Analog Output (AO). A standard 16-channel card accepts only one specific channel type across all ports. This inflexible hardware design often creates severe engineering bottlenecks during project execution. Engineers frequently must install entirely new cards to accommodate a single extra sensor. Consequently, late design changes increase control cabinet space requirements and drive up project costs.
DCS Commissioning Steps in Industrial Automation Projects
Commissioning a Distributed Control System (DCS) represents a crucial milestone when deploying modern process automation infrastructure. Field engineers must execute systematic verification steps to transition complex control hardware from static installation to dynamic plant control. Proper commissioning ensures that controllers, I/O modules, network switches, and HMI software operate in strict compliance with engineering design specifications before introducing live process fluids.