Product Details
The ABB 2VAA008283R101, also cataloged as the BP03 Power Supply Base, operates as a dedicated hardware component for mechanical mounting and electrical backplane interface execution for power supply modules within ABB control platforms. The backplane base serves as the physical carrier designed to accommodate up to two SPS03-5V and two SPS03-15V power supply units simultaneously.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | BP03 (2VAA008283R101) |
| Brand | ABB |
| Origin | Sweden / Germany |
| Operating Temp | -20 deg C to +70 deg C |
| Power Consumption | Passive base structure (no direct power draw) |
| Module Accommodation | 2x SPS03-5V and 2x SPS03-15V modules |
| Product Type | Power Supply Base |
| Environmental Compliance | WEEE Category 5 (Small Equipment) |
Deterministic Network Backplane and System Signal Integrity
The BP03 base plate distributes high-current DC power rails directly to system subrack backplanes, maintaining deterministic performance across all interconnected controller and I/O slots. Internal power distribution busbars support stable voltage delivery without degrading backplane bus communication velocity during peak power demand cycles.
Designed as a modular physical interface, the hardware maintains full firmware flash compatibility across connected processing units by preventing electrical voltage ripple on DC supply channels. Grounding tracks integrated into the base assembly suppress common-mode electrical noise and maintain low impedance earth return paths.
Frequently Asked Questions
Q: Which power supply module configurations are directly supported by the BP03 base?
A: The BP03 base incorporates physical slots and electrical connectors configured to host two SPS03-5V and two SPS03-15V power supply units.
Q: Does the BP03 base require independent firmware configuration?
A: No, the BP03 is a passive backplane distribution assembly that operates without firmware or configuration software.
Q: What precautions are necessary before extracting or inserting power modules into the BP03 base?
A: Primary AC/DC input power sources to the system subrack should be isolated before seating or removing power modules to prevent contact arcing and voltage transients.
Field Installation Guidelines
- De-energize all primary system power distribution feeds before installing or replacing the BP03 base unit.
- Wear an anti-static wrist strap connected to cabinet earth ground to prevent electrostatic discharge during physical handling.
- Align the BP03 base unit with cabinet mounting rails and fasten all retaining screws securely to maintain continuous chassis earth grounding.
- Verify that multi-pin power connectors on the SPS03-5V and SPS03-15V modules align with guide pins on the BP03 base before seating.
- Route high-current DC supply cabling through dedicated cabinet channels, separated from low-level communication and field signal wiring.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Engineering a Process Control System Philosophy: Principles and Operational Impact
A Process Control System (PCS) Philosophy serves as the foundational blueprint for modern plant engineering. During the design and construction phases, this document establishes clear guidelines for instrumentation and control (I&C) teams. Consequently, a well-defined philosophy directly dictates overall operational stability, maintenance efficiency, and future expansion capabilities across heavy process industries.
Engineering MCC Signal Interface Terminations in Modern Process Automation
Industrial manufacturing plants rely on Motor Control Centers (MCC) to drive critical electrical loads. Plant engineers must interface these MCC motor starters and drives with central control systems. Standardizing the Signal Interface Termination (SIT) architecture ensures seamless command delivery and feedback monitoring between field equipment and process automation platforms.
Layer-2 vs. Layer-3 Network Switches in Industrial Control Systems
Modern factory automation relies heavily on robust Industrial Ethernet communications. Control system engineers deploy managed Ethernet switches to connect programmable logic controllers (PLCs), distributed control systems (DCS), human-machine interfaces (HMIs), and field I/O devices. Selecting between Layer-2 and Layer-3 switching architecture directly impacts network throughput, routing capabilities, and overall cybersecurity defense in operational technology (OT) networks.