Product Details
Configured for signal routing, turbine parameter monitoring, and closed-loop control execution in ABB Procontrol P14 OPC platforms, the ABB CS A464AE HIEE400106R0001 (CS A464AE Circuit Board) provides direct physical/electrical execution. The controller board processes field inputs from speed, pressure, and temperature sensors to execute closed-loop control algorithms. It converts sensor inputs into proportional control outputs to drive valve positioning loops and electro-hydraulic actuators across turbine control subracks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CS A464AE HIEE400106R0001 |
| Brand | ABB |
| Origin | Switzerland |
| Weight | 0.50 kg (1.00 lbs) net |
| Dimensions | 6.0 mm x 267.0 mm x 203.0 mm (0.24 in x 10.51 in x 7.99 in) |
| Operating Temp | 0 to +60 deg C (Storage: -40 to +70 deg C) |
| Power Consumption | Supplied via Procontrol P14 subrack backplane |
| System Platform | ABB Procontrol P14 OPC turbine control system |
| Input Signals | Speed, pressure, and temperature sensor inputs |
| Protection Rating | IP00 (installed within IP20 subrack enclosure) |
Backplane Bus Communication Velocity and Firmware Flash Compatibility
The CS A464AE controller board communicates across the internal Procontrol P14 bus structure, maintaining high backplane bus communication velocity required for rapid turbine governor response cycles. Integrated firmware flash compatibility guarantees deterministic execution of stored control routines and configuration parameters across reboot cycles. Internal bus arbitration logic minimizes processing latencies between input acquisition channels and system output drivers.
Frequently Asked Questions
Q: Can the CS A464AE controller board be hot-swapped while the subrack is energized?
A: No. Power to the subrack backplane must be completely disconnected before removing or inserting the module to prevent electrical arcing on backplane connectors and potential communication bus faults.
Q: How are speed and pressure sensor signals isolated within the card circuitry?
A: The board incorporates galvanic isolation and signal filtering components on input channels to prevent field electrical transients from affecting the core processing logic.
Q: What system chassis is required for installing this circuit board?
A: The card is designed for direct slot mounting in standard ABB Procontrol P14 subracks equipped with card alignment rails and multi-pin backplane sockets.
Field Installation Guidelines
- Isolate all electrical power feeds to the Procontrol P14 subrack before inserting or servicing the board.
- Align the printed circuit board edges with the top and bottom card guides of the assigned subrack slot.
- Slide the card smoothly into the chassis until the rear multi-pin connector fully seats into the backplane receptacle.
- Tighten top and bottom front panel retention screws to 0.4 Nm to secure the board against operational vibration and establish frame ground continuity.
- Connect speed, temperature, and pressure sensor cabling using shielded twisted pairs, terminating cable shields at the panel grounding bar to suppress high-frequency electrical noise.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Spatial Computing in Industrial Automation: Elevating PLC and DCS Operations with AR and VR
Industry 4.0 integrates digital intelligence into field operations, transforming factory automation landscapes worldwide. Spatial technologies—specifically Augmented Reality (AR) and Virtual Reality (VR)—redefine how engineers interact with industrial control systems. By bridging computer-generated CAD models with real-time operational technology (OT) data, immersive displays enable intuitive monitoring, rapid diagnostics, and safer maintenance across complex processing facilities.
Master Acceptance Testing: Understanding FAT and SAT in Industrial Control Systems
Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) serve as critical quality assurance gateways in complex industrial control systems. Both procedures verify that programmable logic controllers (PLCs), distributed control systems (DCS), and associated field devices meet strict functional specifications. However, executing these tests effectively requires clear delineation between off-site staging and final field commissioning.
Industrial Networking Essentials: Demystifying Hubs, Switches, and Routers in Control Systems
Industrial automation relies heavily on robust networking infrastructure to connect programmable logic controllers (PLCs), distributed control systems (DCS), and human-machine interfaces (HMIs). Modern factory automation environments generate vast amounts of real-time operational data across deterministic networks. Understanding the structural differences between hubs, switches, and routers ensures optimal traffic segmentation, minimizes latency, and maintains high network availability.