Product Details
Configured for primary AC line power delivery in Foxboro I/A Series system racks, the Foxboro P0170KQ, also cataloged as the P0170KQ Power Cord, provides direct physical/electrical execution. This assembly delivers low-impedance electrical interconnectivity between external facility supply buses and internal chassis power distribution blocks, ensuring continuous line voltage input across cabinet backplane structures.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | P0170KQ |
| Brand | Foxboro |
| Origin | USA |
| Weight | 0.2 kg |
| Cable Length | 2 ft (approx. 0.6 m) |
| Connector Type | Standard industrial power connector for I/A Series devices |
| Voltage Rating | Standard industrial line AC/DC levels |
| Operating Temp | -20 to +70 deg C |
| Insulation Material | Industrial-grade thermoplastic elastomer |
| Environmental Protection | IP-rated dust and moisture resistance |
| Power Consumption | Passive component (Conductor losses < 0.5 W) |
Channel-to-Channel Isolation & Loop Power Integrity
Within DCS process control topologies, line-side power distribution components must maintain structural insulation integrity to minimize common-mode noise propagation into sensitive control hardware. The Foxboro P0170KQ power cord features high-dielectric industrial insulation designed to eliminate parasitic leakage paths. When routing main AC inputs alongside 4-20 mA HART loop wiring or I/O subsystem buses, this assembly maintains electromagnetic isolation, preventing mains-frequency cross-talk from corrupting analog process signals or cold junction compensation (CJC) accuracy on neighboring temperature input modules.
Frequently Asked Questions
Q: What is the maximum physical bend radius permitted during cabinet installation?
A: To preserve internal copper strand integrity and outer jacket dielectric properties, maintain a minimum bend radius of 4 times the outer cable diameter during installation.
Q: Is this power cable rated for hot-swapping during energized rack maintenance?
A: No. Power must be de-energized at the upstream breaker prior to disconnecting or connecting the assembly to prevent connector pin arcing and voltage transients.
Field Installation Guidelines
- Inspect the terminal connectors for bent pins, debris, or compromised insulation prior to insertion.
- Verify that the power distribution block is fully de-energized at the source circuit breaker.
- Align the connector keyway with the matching receptacle on the Foxboro I/A Series power supply module.
- Fully seat the connector until the mechanical latch engages completely.
- Secure the cable run within the enclosure using strain relief ties, maintaining a minimum clearance of 50 mm from low-voltage signal wiring.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Managed Switch vs. Unmanaged Switch: Industrial Ethernet Architecture
Hot Standby vs. Cold Standby Redundancy in Industrial Automation
System availability determines process safety and productivity in industrial automation. Control engineers deploy redundancy to eliminate single points of failure. This technical guide evaluates Hot Standby vs. Cold Standby architectures, comparing failover speeds, memory sync, cost trade-offs, and field selection criteria.
