Product Details
Configured for high-frequency vibration signal conditioning in turbomachinery monitoring systems, the Emerson Epro CON021/916-120 (CON021/916-120 Eddy Current Signal Converter) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CON021/916-120 |
| Brand | Emerson Epro |
| Origin | Germany |
| Weight | 0.12 kg |
| Dimensions | Standard LMgSi 0.5 F22 housing |
| Operating Temp | -30 deg C to +100 deg C |
| Power Consumption | Dependent on input voltage -23 VDC to -32 VDC |
| Frequency Range | 0 Hz to 20000 Hz |
| Output Range | -4 VDC to -20 VDC |
Gap Voltage Validation (-10 VDC targets)
The CON021/916-120 converter utilizes a calibrated oscillator circuit to drive the transducer probe. To ensure linear response across the 12.0 mm extended measuring range, the system requires precise gap voltage validation. The operating range is centered on a target of -10 VDC, which corresponds to the median measurement gap between the sensor face and the shaft surface. Any deviation from this nominal gap voltage during static conditions indicates potential installation misalignment or transducer degradation, impacting the converter's ability to accurately linearize the output signal.
Frequently Asked Questions
Q: Can the CON021/916-120 be used with standard PR6424 probes or is it limited to the PR6426?
A: The converter is optimized for specific transducer characteristics. Ensure the connected probe's impedance matches the calibration profile of the converter to prevent linearity errors exceeding the specified 1.5%.
Q: Is the IP20 protection class suitable for direct installation on the turbine skid?
A: The IP20 rating requires the converter to be mounted within a protective enclosure or junction box to prevent exposure to moisture, dust, and conductive debris.
Field Installation Guidelines
- Mount the converter housing using four M5x20 screws, ensuring a clean electrical path to the machine ground.
- Utilize the self-locking Lemo-plug for the transducer connection, ensuring it is fully seated to prevent intermittent signal noise.
- Terminate the supply and output wiring using high-quality ferrules for the screw terminals, ensuring the wire gauge does not exceed 1.5 mm².
- Verify the power supply polarity (negative logic) before applying -23 VDC to -32 VDC, as incorrect polarity may result in permanent damage to the internal circuitry.
- Shield all output signal leads and ground the shield at the monitoring system end only to mitigate 50/60 Hz electromagnetic noise.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Ensuring Operational Continuity: The Strategic Value of Redundant Automation Systems
In modern industrial landscapes, unplanned downtime is the ultimate adversary. For sectors relying on complex PLC and DCS architectures, a single hardware failure can trigger catastrophic production losses. Therefore, implementing redundant automation systems is no longer a luxury; it is a fundamental requirement for mission-critical operations. In this article, I analyze why redundancy remains the backbone of reliable industrial infrastructure.
Selecting the Right Cables for Industrial Automation: A Comprehensive Guide
Selecting the appropriate cabling infrastructure is critical for the success of any industrial automation project. Improper cable selection often leads to signal degradation, system instability, and costly downtime. As an automation engineer, I frequently see projects compromised by poor cabling choices in harsh industrial environments. This guide simplifies the complex landscape of cabling to help you make informed decisions for your PLC, DCS, and control systems.
Preventing Spurious Trips in Emergency Stop Systems: A Technical Guide
In industrial automation, the Emergency Stop (E-Stop) pushbutton is the ultimate safety line. However, relying on a single Normally-Closed (NC) contact can sometimes lead to unexpected spurious trips. As a control systems engineer, I have seen these nuisance trips halt entire production lines, causing significant downtime. Understanding why these components fail and how to implement robust architecture is essential for any reliable DCS or PLC-based safety system.