Product Details
The ABB CM579-PNIO 1SAP170901R0101, also cataloged as the CM579-PNIO Communication Module, operates as a dedicated hardware component for industrial Ethernet network coordination within AC500 PLC platforms. The module manages localized process data transfer via two integrated physical interfaces operating as a real-time hardware switch. Working at a specified data transmission rate of 100000 kbit/s, the device directly executes PROFINET IO RT master or device cyclic frames and interfaces safety telegrams under the PROFIsafe sub-protocol specification.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CM579-PNIO (1SAP170901R0101) |
| Brand | ABB |
| Origin | Germany |
| Weight | 0.1 kg |
| Dimensions | 28 mm x 62 mm x 135 mm |
| Operating Temp | 0 to +60 deg C (Standard industrial parameters apply) |
| Power Consumption | Supplied via AC500 CPU bus coupler |
| Function | PROFINET IO RT Controller |
| Communication Protocols | PROFINET IO, PROFIsafe |
| Hardware Interfaces | 2x Industrial Ethernet (Integrated Switch) |
| Transmission Rate | 100000 kbit/s (100 Mbit/s) |
| Degree of Protection | IP20 |
Profinet / EtherNet/IP Deterministic Networks Mapping
The ABB CM579-PNIO implements prioritized frame processing mechanisms to achieve precise transmission alignment with Profinet / EtherNet/IP deterministic networks. The dual internal ports bypass standard commercial routing latency by utilizing a localized media access control architecture, validating consistent scan cycles across the synchronous PLC environment. This processing architecture provides predictable data synchronization profiles even when scaling local I/O density demands on the multi-drop controller network.
Frequently Asked Questions
Q: Does the CM579-PNIO module support active hot-swapping into the AC500 terminal base during runtime?
A: No, this communication module does not allow live insertion or removal. The entire local PLC segment must be de-energized before mounting or decoupling the card to prevent catastrophic data bus interruption or hardware latch-up constraints.
Q: Can both Ethernet interfaces be assigned independent IP addresses on different network subnets?
A: No, the two interfaces are connected through an integrated physical layer switch. They share identical MAC and IP configuration fields, functioning primarily to establish a daisy-chain linear topology without an external switch.
Q: How does firmware flash compatibility affect PROFIsafe safety configurations on this card?
A: Safety validation profiles dictate that any firmware flash adjustments on the controller base match the exact certified revision blocks listed within the safety parameters tool to prevent execution halts or default safe-state activations.
Field Installation Guidelines
The communication card must be locked directly onto the designated slot of the AC500 terminal base before sliding the assembly into place onto a standard, grounded structural DIN-rail. To fulfill standard industrial EMC constraints, connection to the integrated switch ports must utilize category 5e or higher shielded twisted-pair (STP) cabling. The grounding shield of the Industrial Ethernet wiring must hook into the physical frame structure via conductive spring clips. Ensure proper ventilation boundaries by retaining a minimum vertical displacement gap of 25 mm above and below the module face plate to prevent internal heat concentration.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Industrial PC vs. Commercial PC: Selecting the Right Hardware for Automation
In the demanding world of factory automation, selecting the correct computing platform is critical for system reliability. While commercial PCs power our daily lives, they often fail when subjected to the harsh realities of the production floor. Understanding the fundamental differences between an Industrial PC (IPC) and a standard office PC helps engineers optimize control systems for longevity and performance.
Core Components of Programmable Logic Controllers (PLC) in Industrial Automation
A Programmable Logic Controller (PLC) serves as the digital backbone of modern factory automation. Whether you are managing complex assembly lines or simple process loops, understanding the hardware and software architecture of a PLC is essential for any control systems engineer.
PLC vs. PC: Navigating the Architectural Differences in Industrial Automation
In the realm of factory automation, professionals often debate the roles of Programmable Logic Controllers (PLCs) and Personal Computers (PCs). While both devices share fundamental computing architectures—including a processor, memory, and an operating system—their design philosophies diverge significantly. Understanding these distinctions is critical for selecting the right hardware for your industrial control systems.