Product Details
The GE DS200UPLAG1B, also cataloged as the DS200UPLA LAN Power Supply Board, operates as a dedicated hardware component for voltage regulation and signal path stabilization within Mark V control system network architectures.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200UPLAG1B |
| Brand | GE (General Electric) |
| Origin | USA |
| Interface | Two 26-pin connectors; One 8-pin connector |
| Protection | Integrated fuse for overcurrent protection |
Industrial Control Deterministic Network
The DS200UPLAG1B provides stable DC output for network communication interfaces within the Mark V series. The board’s architecture incorporates voltage regulation and surge suppression to mitigate transient electrical noise that could otherwise induce packet loss or timing jitter on the network bus. When configuring the unit, the onboard jumpers and switches must be set according to the specific backplane bus communication velocity requirements of the Mark V host controller. Proper firmware flash compatibility must be verified with the system integrator to ensure the board accurately handles the power distribution loads required by connected peripheral modules and prevents deterministic network degradation.
Frequently Asked Questions
Q: Are the interface connectors hot-swappable during system operation?
A: No. Do not attempt to disconnect or connect the 26-pin or 8-pin interface headers while the Mark V system is energized. Hot-swapping risks arc damage to the pins and transient voltage spikes that may disrupt communication across the LAN segment.
Q: What is the function of the onboard fuse regarding system protection?
A: The onboard fuse acts as a sacrificial safety element against overcurrent conditions. If the system experiences a power surge or an excessive current draw, the fuse will open to protect the internal voltage regulation circuitry. If the fuse is blown, the module must be de-energized, inspected for shorts, and the fuse replaced with an identical rating before restoring power.
Field Installation Guidelines
- Mounting: Ensure the board is firmly seated within the designated Mark V cabinet slot. Verify that the connectors are fully aligned before engaging the locking mechanisms to prevent mechanical stress on the PCB.
- Electrical Grounding: Ensure the cabinet chassis is properly earth-grounded. Given the board's role in surge protection, low-impedance paths to ground are required to dissipate transient voltages effectively.
- Cable Management: Route communication cables and power leads along designated cable trays, maintaining physical separation from high-voltage AC lines to prevent induced electromagnetic interference on the LAN interface signals.
- Jumper Settings: Prior to power-up, verify that the configuration of all onboard jumpers aligns with the documented requirements for the specific site network topography. Incorrect settings may cause impedance mismatches or operational instability.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Batch vs Continuous Processing in Industrial Automation: Architectural Strategies for Control Engineers
Selecting the proper control architecture remains a pivotal decision when designing industrial automation systems. Automation engineers must evaluate whether a batch or continuous process model best fits their production requirements. This fundamental choice influences PLC and DCS programming, hardware redundancy, sensor selection, and overall factory automation layouts.
Demystifying Signal Isolators: Operating Principles, Architectural Types, and Industrial Applications
Industrial automation systems rely on pristine analog signal transmission across complex control loops. Instrument technicians and system integrators frequently deploy signal isolators to maintain signal integrity between field sensors and control platforms. Eliminating electrical noise, ground loops, and high-voltage transients protects delicate PLC, DCS, and SCADA input channels from permanent damage.
Demystifying Industrial Control Systems: Comparing PLC, DCS, RTU, SCADA, and PAC
Modern factory automation relies on distinct control architectures to manage complex process environments efficiently. Control engineers often evaluate PLC, DCS, RTU, SCADA, and PAC platforms when designing industrial infrastructure. Understanding the functional boundaries of each technology ensures optimal system performance, high availability, and long-term cost efficiency.