Product Details
The Honeywell TK-PRR021, also cataloged as the TK-PRR021 Redundancy Modules, operates as a dedicated hardware component for C200 controller failover execution within Experion PKS system architectures.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | TK-PRR021 (Part No. 51309288-275) |
| Brand | Honeywell |
| Origin | USA / Global Manufacturing |
| Weight | 0.45 kg (Shipping Weight: 2 kg) |
| Operating Temp | 0 to +60 deg C |
| Power Consumption | 0.090 A at 24 VDC / 1.000 A at 5 VDC / 0.750 A at 3.3 VDC / 0.007 A at 1.2 VDC |
| Product Type | Redundancy Module (RM) |
| Chassis Slots Used | 2 slots |
| Controller Support | C200 Controller Redundancy Pair |
Channel-to-Channel Isolation and Deterministic Synchronization
The TK-PRR021 module provides dedicated fiber-optic sync link routing between primary and secondary C200 controller nodes. Operating alongside field analog process loops using the 4-20 mA HART loop protocol, the redundancy interface maintains full channel-to-channel isolation across backplane buses to block common-mode noise and ground loops.
High-speed memory reflection cycles between redundant C200 processors occur continuously without impacting control execution loops or disturbing analog signal integrity across local I/O subnets.
Frequently Asked Questions
Q: How many chassis slots does the TK-PRR021 redundancy module require?
A: The TK-PRR021 occupies 2 adjacent slots within the Honeywell C200 rack chassis.
Q: What are the backplane power supply current draws for the TK-PRR021 module?
A: The module draws 0.090 A at 24 VDC, 1.000 A at 5 VDC, 0.750 A at 3.3 VDC, and 0.007 A at 1.2 VDC from the backplane power bus.
Q: Can the redundancy module be replaced while the primary controller is operating?
A: Replacement must follow Honeywell C200 maintenance procedures to ensure state synchronization is safely held by the active redundant pair during module swap.
Field Installation Guidelines
- Ensure the C200 chassis power supply capacity meets total backplane current requirements, including the multi-rail power draw of the TK-PRR021.
- Fully seat the module into the two designated chassis slots and tighten the top and bottom retaining screws to ensure proper backplane connection.
- Connect dedicated redundancy link cables directly between paired TK-PRR021 modules without routing through intermediary switches.
- Maintain clean optical fiber connections on redundancy link ports and adhere to minimum cable bend radius limits in enclosure raceways.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Understanding Safety Relays in Industrial Automation: Architecture, Operation, and Functional Safety
Standard electromechanical relays provide basic electrical isolation between low-voltage control circuits and high-power output loads. A traditional switching relay features a magnetic coil driving mechanical Common (COM), Normally-Open (NO), and Normally-Closed (NC) contacts. However, standard relays pose severe functional risks when deployed in critical safety interlock circuits. High current inrush or mechanical wear can weld contacts together permanently. If contact welding occurs in an emergency stop circuit, pressing the button fails to halt hazardous machinery movements. Consequently, global functional safety standards prohibit standard relays for critical machine guarding functions.
Mastering Wire Identification in Industrial Automation: The Power of Ferrules and Cross-Ferruling
Proper wire labeling forms the cornerstone of reliable control system installation and long-term maintenance. In complex industrial automation environments, technicians terminate thousands of conductor ends inside control panels, marshalling racks, and field junction boxes. Ferrules serve as individual tube-shaped sleeve markers slipped onto conductors before final termination. While technicians historically relied on pre-printed individual letter rings, modern control panel builders utilize automated ferrule printing machines. These thermal-transfer printers generate durable, single-sleeve heat-shrink tags directly matching approved wiring schematics, significantly accelerating cabinet assembly workflows.
Understanding Marshalling Cabinets in Industrial Automation and Control Systems
Marshalling cabinets serve as the crucial connection hub between field instruments and centralized processing units. In large DCS and PLC control system architectures, hundreds of multipair field cables run from local junction boxes to the central instrument equipment room. The marshalling cabinet houses field terminal blocks, surge arresters, intrinsic safety isolation barriers, and interposing relays. By segregating field field-wiring terminations from sensitive processor hardware, engineers protect expensive controller backplanes from high-voltage transients. Consequently, this modular separation dramatically streamlines maintenance workflows and simplifies system expansion.