Product Details
The GE DS200TCEBG1A, also cataloged as the DS200TCEB Protective Termination Expander Board, operates as a dedicated hardware component for signal routing and terminal expansion within Mark V turbine control platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200TCEBG1A |
| Brand | GE General Electric |
| Origin | USA |
| Dimensions | Standard Mark V PCB footprint |
| Operating Temp | Per Mark V environmental standards |
| Power Consumption | Passive signal path component |
| Interface Connectors | 1 x 26-pin, 4 x 10-pin, 3 x 20-pin |
| Mechanical Mounting | 8-point screw securement |
Industrial Control and Firmware Compatibility
The DS200TCEBG1A serves as a signal conditioning and termination interface for the Mark V control rack. Unlike processor-heavy modules, this board functions as a passive expansion assembly featuring signal transformers and voltage-limiting components (resistors, diodes, capacitors) to protect the underlying control electronics. As this module does not contain programmable microprocessors or PROM modules, it does not require firmware flash compatibility or backplane bus communication velocity settings. It is designed to scale I/O connectivity for complex drive assemblies without adding computational overhead to the host controller.
Frequently Asked Questions
Q: Does the board require software or hardware configuration?
A: No. The DS200TCEBG1A is a passive termination expander board. It contains no user-configurable jumpers or switches, and requires no software parameter entry for operation.
Q: How many mounting points are provided for installation?
A: The board is designed with 8 screw holes to ensure mechanical stability given the weight of the onboard transformers and connectors. All 8 screws must be utilized to prevent vibration-induced fatigue.
Field Installation Guidelines
- Documentation: Before disconnecting any cables, label every ribbon cable and wiring harness with its corresponding connector ID (e.g., JKX, JMP, JPU). This is critical for preventing misconnection during the re-installation phase.
- Component Retention: When removing the securing screws, ensure the board is supported with one hand to prevent the PCB from dropping into the drive interior. If any hardware (screws/washers) falls into the drive, it must be retrieved immediately to prevent potential electrical shorts or mechanical interference.
- Connector Integrity: Inspect all connectors (JKX/Y/Z, JMP, JVA, etc.) for bent pins or debris before mating. Ensure cables are fully seated and latched to maintain signal integrity.
- Mounting: Tighten all 8 mounting screws evenly to ensure the PCB remains flat against the standoffs, preventing mechanical stress on the board or its mounted components.
- Safety: Confirm that the drive system is fully de-energized and capacitors are discharged before removing or installing the board to prevent accidental short circuits or electrical shock.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Essential SCADA Features for Modern IoT-Enabled Industrial Automation
The convergence of traditional SCADA systems with the Industrial Internet of Things (IIoT) has redefined factory automation. Choosing a robust platform requires more than just standard monitoring capabilities. In this era of Industry 4.0, your supervisory system must bridge the gap between legacy control systems and enterprise-level data integration.
Selecting Rockwell Automation Allen-Bradley PLCs for Small and Mid-Sized Applications
Rockwell Automation remains a cornerstone in global industrial automation. Their Allen-Bradley brand provides a comprehensive portfolio of control systems designed to meet diverse production requirements. Choosing the right programmable logic controller (PLC) is critical for system reliability and scalability. This guide analyzes the Micro and Compact Logix families to help you select the optimal solution for small and medium-scale projects.
Strategic Selection: Choosing the Right SCADA Software for Your PLC Project
In industrial automation, the SCADA (Supervisory Control and Data Acquisition) system acts as the bridge between raw machine data and actionable human intelligence. Selecting the incorrect software platform can lead to integration bottlenecks, scalability issues, and excessive long-term maintenance costs. As an automation consultant with 15 years of experience, I have guided many projects through the selection process. Below are the essential criteria for choosing a platform that ensures both performance and longevity.