Product Details
The Foxboro A2H254-16 P0973BK, also cataloged as the A2H254-16 Ethernet Switch, operates as a dedicated hardware component for deterministic network packet routing and industrial network backhaul communication within Foxboro DCS architectures. Configured with 16 total Fast Ethernet ports and dual Mini-GBIC SFP uplink expansion slots, it manages real-time control traffic across enterprise and industrial network segments.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | A2H254-16 P0973BK |
| Brand | Foxboro |
| Origin | USA |
| Operating Temp | 0 deg C to +50 deg C |
| Power Consumption | 30 W maximum |
| Total Port Count | 16 Fast Ethernet ports + 2 Mini-GBIC SFP slots |
| Copper Interfaces | 8 x 10/100 Mbps RJ45 (100BASE-T) |
| Fiber Interfaces | 8 x 100BASE-FX multimode MT-RJ |
| Stacking Capacity | Up to 8 units via SecureStack bus |
Channel-to-Channel Isolation and Loop Protocol Connectivity
The Foxboro A2H254-16 P0973BK switch incorporates physical optical isolation via its multimode MT-RJ fiber ports, preventing high common-mode noise and ground potential differences between field enclosures from disrupting control data. This optical isolation isolates DCS node communications from high-voltage surges, preserving signal integrity for underlying 4-20 mA HART loop protocol field networks and preventing thermal ground loop offsets at remote cold junction compensation (CJC) sensor nodes.
Frequently Asked Questions
Q: How does auto-negotiation operate on the 10/100BASE-T copper RJ45 ports?
A: The switch automatically senses link speed (10 Mbps or 100 Mbps) and duplex mode (half or full) on connected network devices to establish optimal physical connection parameters without manual configuration.
Q: What is the maximum stacking limit for the A2H254-16 P0973BK assembly?
A: Up to eight SecureStack A2 switches can be interconnected using the stacking bus, forming a single managed switch fabric with centralized IP addressing.
Field Installation Guidelines
Mount the switch into a standard 19-inch equipment rack or control cabinet frame using factory-approved brackets. Prior to energizing the unit, verify that cabinet power distribution feeds conform to rated input voltage limits.
Insert fiber cables into the 100BASE-FX MT-RJ connectors carefully to avoid end-face contamination, observing minimum fiber bend radius limits. Connect copper Ethernet drops to the RJ45 ports using shielded twisted-pair (STP) cables, ensuring the shield is grounded at the cabinet entry barrier. Bond the switch chassis directly to the main cabinet earth ground bar, and ensure all conduit penetrations maintain a minimum of 5 full threads of engagement on NPT fittings.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Managed Switch vs. Unmanaged Switch: Industrial Ethernet Architecture
Hot Standby vs. Cold Standby Redundancy in Industrial Automation
System availability determines process safety and productivity in industrial automation. Control engineers deploy redundancy to eliminate single points of failure. This technical guide evaluates Hot Standby vs. Cold Standby architectures, comparing failover speeds, memory sync, cost trade-offs, and field selection criteria.
