Product Details
The Bently Nevada 330104-00-05-90-02-05 is a 3300 XL 8 mm proximity probe with an M10 x 1 metric thread, a 50 mm overall case length, and a 9.0 m (approx. 29.5 ft) total system length in flexible 304 stainless steel armor. Equipped with a miniature coaxial ClickLoc connector and CSA, ATEX, and IECEx approvals, it provides non-contacting displacement sensing for vibration and axial position monitoring.
Configuration and System Function
Within a 3300 XL eddy-current transducer system, the probe converts the gap between its sensing tip and a conductive target into a voltage signal for shaft vibration and axial position measurement in Turbine Supervisory Instrumentation (TSI) and machinery monitoring setups. This model is factory-calibrated for AISI 4140 steel targets and operates from -51 deg C to +177 deg C (-60 deg F to +351 deg F).
The 330104-00-05-90-02-05 configuration uses an M10 x 1 metric thread with a 0 mm unthreaded body length and a 50 mm overall case length. Its 9.0 m (approx. 29.5 ft) total system length and miniature coaxial ClickLoc interface support longer cable runs where required by the machinery layout.
Mechanical Construction and Protection
The probe incorporates structural features designed for cable retention and housing protection:
- TipLoc Molding: Bonds the Polyphenylene Sulfide (PPS) tip to the probe body to resist moisture or oil ingress into the sensing coil.
- CableLoc Design: Anchors the cable internally for up to 330 N (75 lbf) pull-out strength to reduce mechanical tension on the electrical joint during installation.
- Flexible Armor Protection: Encloses the FEP-insulated coaxial cable in flexible 304 stainless steel armor to protect against abrasion and accidental cutting.
Confirm exact CSA, ATEX, and IECEx certification ratings and installation conditions against site permits and the mating 3300 XL electronics before deployment.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330104-00-05-90-02-05 |
| Brand | Bently Nevada |
| Probe Size | 8 mm |
| Thread Specification | M10 x 1 metric (model 330104) |
| Unthreaded Body Length | 0 mm |
| Overall Case Length | 50 mm |
| Total System Length | 9.0 m (approx. 29.5 ft) |
| Cable and Armor | FEP-insulated coaxial cable in flexible 304 stainless steel armor |
| Connector Type | Miniature coaxial ClickLoc |
| Target Calibration | Factory-set for AISI 4140 steel |
| Operating Temperature | -51 deg C to +177 deg C (-60 deg F to +351 deg F) |
| Hazardous Area Approvals | CSA, ATEX, IECEx |
Frequently Asked Questions
Q: What mechanical cable protection does the 330104-00-05-90-02-05 provide?
A: It uses an FEP-insulated coaxial cable inside flexible 304 stainless steel armor, paired with a CableLoc internal anchor rated up to 330 N (75 lbf) pull-out strength and TipLoc molding on the PPS tip.
Q: What target material is this probe calibrated for, and what temperature range applies?
A: It is factory-set for AISI 4140 steel targets and rated for an operating temperature range of -51 deg C to +177 deg C (-60 deg F to +351 deg F). Verify matching Proximitor and extension cable specifications for the complete transducer channel.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.





























