Product Details
The Bently Nevada 330101-00-26-10-02-05 is a 3300 XL 8 mm eddy-current proximity probe for non-contacting shaft vibration and position measurement on rotating machinery. Configured for a 26 ft total system length with a stainless steel housing and triple-shielded coaxial cable, it operates over a 2 mm linear range and -52 deg C to +177 deg C.
Ordering Code and Signal Characteristics
The 330101-00-26-10-02-05 part number designates a 3300 XL 8 mm probe configured with a 26 ft total transducer system length and corresponding cable and approval options. In a 3300 XL monitoring channel, the probe provides dynamic displacement signals across a 0.5 Hz to 10 kHz frequency response within a 2 mm linear range.
The probe uses eddy-current sensing and a triple-shielded coaxial cable inside a stainless steel housing. Matching the probe with approved 3300 XL extension cables and Proximitor sensors preserves calibrated transducer linearity and signal integrity over the 26 ft system length.
Mounting and Commissioning Practices
During startup, set the probe gap voltage to establish linear displacement operation; typical turbine setups use a gap voltage around -8 VDC to -12 VDC. Routing the coaxial cable away from high-voltage motor feeders and inverter output cables helps limit electromagnetic interference on low-level sensor wiring.
Keep cable bends and mechanical tension within limits along cable trays and mounting paths. Where hazardous area requirements apply, verify grounding continuity and use certified conduit fittings according to site classification rules.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330101-00-26-10-02-05 |
| Brand | Bently Nevada |
| Sensing Principle | Eddy-current |
| Probe Diameter | 8 mm |
| Measurement Range | 2 mm linear range |
| Frequency Response | 0.5 Hz to 10 kHz |
| Total System Length | 26 ft |
| Housing Material | Stainless steel |
| Cable Type | Triple-shielded coaxial cable |
| Operating Temperature | -52 deg C to +177 deg C |
| Weight | Approx. 0.34 kg |
| Shipping Dimensions | 29 x 24 x 7 cm |
| Country of Origin | USA |
Frequently Asked Questions
Q: What gap voltage range is typically used during commissioning for this probe?
A: Typical turbine setups operate with a gap voltage around -8 VDC to -12 VDC during startup to maintain linear displacement measurement. Confirm exact target values against the specific machinery and Proximitor sensor setup.
Q: What does the 26 ft total system length mean for installation?
A: It defines the total transducer system length for the 3300 XL channel and requires pairing with matching 3300 XL extension cables and Proximitor electronics as specified for the system calibration.
Q: What wiring precautions apply when routing the coaxial cable?
A: Avoid excessive bending stress and mechanical tension, and separate the coaxial cable from high-voltage motor feeders and inverter output cables to reduce electromagnetic interference.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.





























