Product Details
Product Overview
The Schneider Electric BMXCPS2000 supplies regulated electrical power to standard Modicon X80 automation racks. This primary AC-driven unit converts mainline utility power into three independent secondary direct-current (DC) rails. It simultaneously energizes the main CPU processor, downstream digital or analog I/O hardware, and external field sensors, functioning as the foundational power distribution core for discrete manufacturing and infrastructure automation assemblies.
Technical Specifications
| Parameter | Technical Specification Data |
| Manufacturer | Schneider Electric |
| Model | BMXCPS2000 |
| Range of Product | Modicon X80 |
| Product Type | Power Supply Module |
| Condition | 100% Brand New Original |
| Primary Input Voltage | 100...240 V AC (Absolute Limit: 85...264 V AC) |
| Network Frequency | 50/60 Hz (Operational Window: 47…63 Hz) |
| Apparent Power | 0.07 kVA |
| Input Current Profile | 0.61 A at 115 V AC / 0.31 A at 240 V AC |
| Inrush Current Peak | 30 A at 120 V AC / 60 A at 240 V AC |
| Secondary Power (3.3V) | 8.3 W DC (2.5 A) for I/O module logic |
| Secondary Power (24V System) | 16.8 W DC (0.7 A) for I/O modules and processor |
| Secondary Power (24V Sensor) | 10.8 W DC (0.45 A) for dedicated field sensor supply |
| Backplane Compatibility | Standard X80 racks (Not compatible with BMEXBP..02) |
| Mean Time Between Failures | 4,638,000 Hours (MTBF) |
| Insulation Resistance | >= 100 MOhm between primary circuit, ground, and secondary |
| Product Net Weight | 0.7 lb (0.3 kg) |
Engineering Advantages
-
Triple-Rail Clean Power Separation: The BMXCPS2000 segregates its secondary output into three dedicated paths: an 8.3 W rail for backplane logic, a 16.8 W rail for module/processor driving, and an isolated 10.8 W sensor loop. This structure blocks raw field sensor short-circuits or field wiring mistakes from breaching the internal processing bus, preventing total controller corruption.
-
Comprehensive Circuit Protection Arrays: Industrial grid fluctuations damage low-voltage hardware. The module counters this risk through integrated secondary overvoltage, overload, and short-circuit protection circuits. An internal primary fuse provides a final defensive layer against massive grid overcurrent spikes.
-
Exceptional Thermal and Operational Longevity: The unit achieves an MTBF rating of 4,638,000 hours. The ultra-low internal power dissipation (8.5 W maximum) minimizes heat buildup within sealed electrical cabinets, eliminating the need for forced-air cooling fans and reducing overall thermal stress on surrounding components.
-
Manual Cold Restart Overrides: A dedicated front-panel RESET push-button allows maintenance technicians to initiate a cold restart directly at the rack. This speeds up field commissioning and validation routines by clearing temporary hardware fault lockups without requiring a complete power cycling of the main breaker.
-
Immediate Dual-LED Diagnostics: The front face features clear physical status indicators. A green rack voltage LED validates internal backplane status, while a separate green sensor voltage LED confirms active 24 V DC field loop power, shortening visual inspection times during routine maintenance.
FAQs
-
Is this BMXCPS2000 power supply a brand new original unit?
Yes. We supply this module only as a 100% brand new, original factory-packaged item. It ships directly in the authentic manufacturer box with all original factory seals and documentation intact.
-
Can I install the BMXCPS2000 on any Modicon backplane?
The module fits standard Modicon X80 backplanes. However, you must check your rack part number before installation, as this specific power supply does not support Ethernet-enabled hybrid racks beginning with the prefix code "BMEXBP..02".
-
Does the primary circuit allow field-level fuse replacement?
No. The primary circuit utilizes an internal, non-accessible fuse designed to protect the cabinet from catastrophic component failures. If an external fault triggers this fuse, you must swap out the unit. To protect the module, install external circuit breakers or fast-acting fuses upstream on the line supply wire.
-
What wiring terminals do the front connectors provide?
The module separates field connections into two dedicated plug-in block interfaces. One connector provides a pair of alarm relay contacts for remote monitoring, while the second connector groups the 5 line supply wires, protective earth ground, and the 24 V DC sensor output.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Choosing the Right Controller: PLC vs. Motion Controller in Industrial Automation
Selecting the optimal control architecture is a foundational decision in industrial automation. Engineers must frequently choose between a Programmable Logic Controller (PLC) and a dedicated Motion Controller. While both systems manage machinery, their underlying design philosophies differ significantly, impacting performance, scalability, and system integration.
Mastering PLC Power Supply Architectures and Operating Voltages
Selecting the correct operating voltage is a critical step in designing reliable industrial automation systems. Whether you are working with a compact PLC or a large-scale DCS, your power architecture dictates the system's longevity. In this guide, we explore the standard voltage ranges and power distribution strategies required to maintain stable factory automation operations.
Optimizing Power Supply Sizing for Industrial Automation Systems
The power supply is the silent heartbeat of any industrial automation system. While engineers often prioritize processors and communication protocols, a stable power architecture remains the most critical factor for long-term reliability. In my 15 years of experience, I have found that neglecting power supply sizing often leads to ghost errors, intermittent field device failures, and costly production downtime.