Product Details
Configured for high-integrity loop execution in safety-instrumented platforms, the ICS Triplex T8480 (T8480 Analog Output Module) provides direct physical/electrical execution. The hardware operates across 40 channels organized into 5 distinct power groups to drive 1 mA to 22 mA field loops under 20 VDC to 32 VDC backplane bus power.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | T8480 |
| Brand | ICS Triplex |
| Origin | United Kingdom |
| Dimensions | Standard T8100/T8300 Slot Form Factor |
| Operating Temp | 0 deg C to +60 deg C |
| Power Consumption | 22 W Backplane / 28 W System Supply Power Dissipation |
| Number of Outputs | 40 Channels |
| Power Groups | 5 Groups |
| Output Current Range | 1 mA to 22 mA |
| Field Supply Voltage | 18 VDC to 32 VDC (0.9 A max field supply current) |
| Isolation Voltage | 50 V Reinforced continuous / 250 V Basic fault |
| Calibration Accuracy | +/-0.1% FS (+25 deg C) / +/-0.25% FS (0 deg C to +60 deg C) |
| Step Response Time | Less than 50 ms (1 mA to 20 mA step to 1% final value) |
| Short Circuit Protection | 22 mA into 0 Ohm |
High-Reliability Safety Control & TMR Architecture
The T8480 incorporates triple modular redundancy (TMR) 2oo3 architecture to satisfy SIL3 certification requirements in emergency shutdown and safety-critical execution loops. Signal routing across the inter-module bus (IMB) maintains complete fail-safe state execution through dedicated fault isolation boundaries. Galvanic isolation rated at 50 V continuous reinforced insulation protects channel groups against common-mode electrical faults, suppressing inter-channel disturbance and preventing uncommanded signal shifts during system transients.
Frequently Asked Questions
Q: How does the T8480 handle output current transients during hot-swap module replacement?
A: During standby swap conditions, bump fault leakage is strictly constrained to a maximum of +/-350 uA for up to 7 seconds, with peak transient excursions capped at +/-10 mA for less than 50 ms.
Q: Are the internal output fuses field-replaceable by maintenance staff?
A: No. The internal fusing components are integrated within the module assembly and are not user serviceable.
Q: What slot locations in the system rack accommodate the T8480 module?
A: The module is engineered specifically for installation in designated T8100 and T8300 I/O module chassis slots.
Field Installation Guidelines
- Disconnect or isolate the 18 VDC to 32 VDC field power supply before wiring field terminal blocks to prevent transient arcing across power group boundaries.
- Route field current loop wiring through shielded twisted-pair cables, terminating shields to the system earth busbar to maintain +/-0.1% full scale calibration accuracy.
- Ensure the module is fully aligned and latched into the T8100 or T8300 slot backplane connectors to maintain adequate galvanic insulation and backplane current transfer.
- Verify field wiring load impedance does not force current limits below the required 1 mA threshold during loop commissioning.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Site Acceptance Testing (SAT) for PLC Control Systems: An Engineering Execution Guide
The Site Acceptance Test (SAT) represents the definitive handover stage in industrial automation projects. While the Factory Acceptance Test confirms cabinet hardware assembly off-site, the SAT validates real-world performance under live site conditions. Consequently, a structured execution strategy prevents equipment damage and guarantees seamless integration into plant operations.
Mastering the Factory Acceptance Test (FAT) for PLC Control Panels: An Expert Guide
The Factory Acceptance Test (FAT) is a vital milestone in industrial automation that ensures custom PLC panels meet exact design specifications before dispatch. This guide outlines the step-by-step FAT procedure and key industry best practices to prevent costly site delays and ensure long-term operational success.
Redundant Automation Systems: Ensuring Continuous Uptime in Critical Control Infrastructure
System reliability directly determines operational profitability across high stakes process industries. Modern industrial automation platforms must eliminate single points of failure to prevent catastrophic shutdowns. Deploying fault tolerant architecture safeguards complex facilities against unexpected hardware glitches, network disruptions, and maintenance outages.