Product Details
Configured for high-speed fieldbus data exchange in Experion PKS platforms, the Honeywell 8U-IP0102 (8U-IP0102 PROFIBUS Gateway Module) provides direct physical/electrical execution between Honeywell controller backplanes and PROFIBUS DP slave nodes.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 8U-IP0102 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.45 kg |
| Dimensions | 125 mm x 45 mm x 110 mm |
| Operating Temp | 0 deg C to +60 deg C |
| Power Supply | 24 VDC |
| Power Consumption | 430 mA |
| Communication Protocol | PROFIBUS DP |
| Mounting Type | DIN rail or panel mount |
4-20 mA HART and Fieldbus Protocol Bridging Profiles
The module provides full deterministic data mapping between internal process controller memory structures and downstream field networks. Incorporating channel-to-channel isolation and managed protocol conversion, the device mitigates common-mode electrical noise across long field cable runs. Digital communication blocks support cyclic process data exchange while maintaining fast frame throughput without compromising backplane bus scanning stability.
Frequently Asked Questions
Q: What is the primary installation mounting requirement for the 8U-IP0102 gateway module?
A: The module is engineered for standard TS35 DIN-rail mounting or direct panel mounting within a grounded enclosure.
Q: How is primary operational power delivered to the 8U-IP0102 module?
A: Power is supplied via a nominal 24 VDC external supply line, drawing a maximum operating current of 430 mA under full communication bus load.
Q: Does the PROFIBUS line require specific termination when connected to this gateway?
A: Yes, standard PROFIBUS RS-485 bus segment rules apply. Active bus termination must be enabled or installed at both physical end nodes of the segment to prevent signal reflections.
Field Installation Guidelines
- Ensure panel supply power is completely switched off prior to mounting or removing the module from the DIN rail assembly.
- Maintain a minimum vertical clearance of 50 mm above and below the module chassis to guarantee passive convective cooling across the operating range of 0 deg C to +60 deg C.
- Connect the PROFIBUS RS-485 shielded twisted-pair cable to the front port connector. Ensure the cable shield is bonded to low-impedance functional earth (FE) using an approved grounding clamp directly at the cabinet entry point.
- Route fieldbus communication wiring in separate wire ducts away from high-voltage AC lines, variable frequency drive outputs, or inductive motor loads to avoid signal degradation.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Step-by-Step System Cabinet Health Check Guide for PLC and DCS Infrastructure
Top 5 Operational Advantages of HMIs in Modern Factory Automation
