Product Details
Configured for high-integrity loop execution in safety-instrumented platforms, the ICS Triplex T8480 (T8480 Analog Output Module) provides direct physical/electrical execution. The hardware operates across 40 channels organized into 5 distinct power groups to drive 1 mA to 22 mA field loops under 20 VDC to 32 VDC backplane bus power.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | T8480 |
| Brand | ICS Triplex |
| Origin | United Kingdom |
| Dimensions | Standard T8100/T8300 Slot Form Factor |
| Operating Temp | 0 deg C to +60 deg C |
| Power Consumption | 22 W Backplane / 28 W System Supply Power Dissipation |
| Number of Outputs | 40 Channels |
| Power Groups | 5 Groups |
| Output Current Range | 1 mA to 22 mA |
| Field Supply Voltage | 18 VDC to 32 VDC (0.9 A max field supply current) |
| Isolation Voltage | 50 V Reinforced continuous / 250 V Basic fault |
| Calibration Accuracy | +/-0.1% FS (+25 deg C) / +/-0.25% FS (0 deg C to +60 deg C) |
| Step Response Time | Less than 50 ms (1 mA to 20 mA step to 1% final value) |
| Short Circuit Protection | 22 mA into 0 Ohm |
High-Reliability Safety Control & TMR Architecture
The T8480 incorporates triple modular redundancy (TMR) 2oo3 architecture to satisfy SIL3 certification requirements in emergency shutdown and safety-critical execution loops. Signal routing across the inter-module bus (IMB) maintains complete fail-safe state execution through dedicated fault isolation boundaries. Galvanic isolation rated at 50 V continuous reinforced insulation protects channel groups against common-mode electrical faults, suppressing inter-channel disturbance and preventing uncommanded signal shifts during system transients.
Frequently Asked Questions
Q: How does the T8480 handle output current transients during hot-swap module replacement?
A: During standby swap conditions, bump fault leakage is strictly constrained to a maximum of +/-350 uA for up to 7 seconds, with peak transient excursions capped at +/-10 mA for less than 50 ms.
Q: Are the internal output fuses field-replaceable by maintenance staff?
A: No. The internal fusing components are integrated within the module assembly and are not user serviceable.
Q: What slot locations in the system rack accommodate the T8480 module?
A: The module is engineered specifically for installation in designated T8100 and T8300 I/O module chassis slots.
Field Installation Guidelines
- Disconnect or isolate the 18 VDC to 32 VDC field power supply before wiring field terminal blocks to prevent transient arcing across power group boundaries.
- Route field current loop wiring through shielded twisted-pair cables, terminating shields to the system earth busbar to maintain +/-0.1% full scale calibration accuracy.
- Ensure the module is fully aligned and latched into the T8100 or T8300 slot backplane connectors to maintain adequate galvanic insulation and backplane current transfer.
- Verify field wiring load impedance does not force current limits below the required 1 mA threshold during loop commissioning.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Understanding Root Causes of Unplanned PLC Stop Mode in Industrial Automation
Modern Programmable Logic Controllers manage execution through distinct operational states: Run, Stop, Start-Up, and Hold. During power-up, a controller initializes memory registers within Stop mode before briefly transitioning to Start-Up mode. During this phase, internal self-diagnostics evaluate system integrity across hardware and user programs. If the controller detects no critical faults, it enters Run mode to execute the control program continuously. However, any severe system anomaly forces the CPU back into Stop mode immediately to prevent erratic machine behavior across the plant floor.
Human-Machine Interface Design: Essential Guide to HMI Selection, Visualization, and Control System Integration
Human-Machine Interfaces (HMIs) serve as the primary operational window into complex industrial automation systems. Modern HMIs convert raw machine data into clear graphical displays, enabling operators to oversee entire manufacturing processes in real time. Instead of relying on physical control panels full of hardwired switches, engineers program interactive screens using intuitive graphics, dynamic color coding, and responsive touch interfaces. Over my 15 years in control systems engineering, I have observed HMIs transform from basic display screens into sophisticated command centers that drive operational efficiency across DCS and PLC environments.
Understanding Safety Relays in Industrial Automation: Architecture, Operation, and Functional Safety
Standard electromechanical relays provide basic electrical isolation between low-voltage control circuits and high-power output loads. A traditional switching relay features a magnetic coil driving mechanical Common (COM), Normally-Open (NO), and Normally-Closed (NC) contacts. However, standard relays pose severe functional risks when deployed in critical safety interlock circuits. High current inrush or mechanical wear can weld contacts together permanently. If contact welding occurs in an emergency stop circuit, pressing the button fails to halt hazardous machinery movements. Consequently, global functional safety standards prohibit standard relays for critical machine guarding functions.