Product Details
The ABB CCF10 2MBPS, also cataloged as the CCF 10 Coupling Module, operates as a dedicated hardware component for protocol conversion and serial data transmission within ABB control and automation networks. The unit manages physical layer signal coupling over a Modbus interface at speeds up to 2 Mbps, facilitating high-speed data frame transfer between controller racks and remote field devices.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CCF 10 2MBPS (Product ID: EXC788713-2) |
| Brand | ABB |
| Product Type | Communication Modules |
| Communication Interface | Modbus Interface |
| Baud Rate | Up to 2 Mbps |
| Net Weight | 1.2 kg |
| Gross Weight | 1.2 kg |
| Operating Temp | 0 to +60 deg C (standard panel ambient) |
| Power Consumption | Powered via backplane bus connection |
Backplane Bus Communication Velocity and Firmware Flash Compatibility
The coupling module integrates directly with the system rack backplane, leveraging high backplane bus communication velocity to route Modbus registers without introducing transmission latencies. Inter-module communication frames sync deterministically with external Profinet or EtherNet/IP deterministic networks through host gateway processors. Onboard firmware flash compatibility ensures stable register mapping and parity bit synchronization across various system firmware revisions.
Frequently Asked Questions
Q: Does the CCF10 module require dedicated external power wiring?
A: No, operating power is drawn directly through the rack backplane connector when properly seated in the subrack chassis.
Q: What transmission rate is supported on the Modbus communication link?
A: The module supports data transfer rates up to 2 Mbps over the dedicated Modbus interface.
Field Installation Guidelines
- Module Slot Insertion: Align the CCF10 circuit board with the guide rails of the chassis rack and push firmly until the backplane connector fully seats.
- Fastening: Hand-tighten top and bottom panel retaining screws to secure mechanical alignment and establish chassis earth ground.
- Cable Termination: Ensure RS-485/Modbus serial lines utilize proper end-of-line termination resistors to suppress transmission line reflections at 2 Mbps signaling rates.
- Shield Grounding: Connect communication cable drain wires to the designated panel earth terminal to prevent high-frequency noise interference.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Safety Relays in Industrial Automation: Fundamentals, Design Standards, and Fail-Safe Architecture
Safety relays form the bedrock of functional safety in modern factory automation, preventing catastrophic equipment failure and protecting plant personnel. While standard electromechanical relays handle basic load switching, they lack the redundant diagnostics required for high-risk industrial environments. Modern industrial automation platforms—including programmable logic controllers (PLCs) and distributed control systems (DCS)—rely on specialized safety relays to monitor field devices and isolate hazards instantly.
Voice-Activated Industrial Automation: Integrating Speech Control into PLC and DCS Architectures
Industrial automation integrates speech recognition, IIoT protocols, and NLP with PLCs and DCS to streamline operations. By leveraging advanced edge computing, engineers enable real-time, hands-free control—allowing personnel to manage smart factory processes safely away from hazardous equipment.
Modern Industrial Automation: Transforming Safety and Efficiency in Mining Operations
Industrial automation has evolved from a simple manufacturing tool into the operational backbone of high-risk sectors. Modern mining operations increasingly rely on advanced control systems, programmable logic controllers (PLCs), distributed control systems (DCS), and artificial intelligence to address deep-underground hazards. By replacing manual labor in high-risk zones, factory automation technologies protect personnel while significantly boosting operational throughput.