Product Details
The ABB CM579-PNIO 1SAP170901R0101, also cataloged as the CM579-PNIO Communication Module, operates as a dedicated hardware component for industrial Ethernet network coordination within AC500 PLC platforms. The module manages localized process data transfer via two integrated physical interfaces operating as a real-time hardware switch. Working at a specified data transmission rate of 100000 kbit/s, the device directly executes PROFINET IO RT master or device cyclic frames and interfaces safety telegrams under the PROFIsafe sub-protocol specification.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CM579-PNIO (1SAP170901R0101) |
| Brand | ABB |
| Origin | Germany |
| Weight | 0.1 kg |
| Dimensions | 28 mm x 62 mm x 135 mm |
| Operating Temp | 0 to +60 deg C (Standard industrial parameters apply) |
| Power Consumption | Supplied via AC500 CPU bus coupler |
| Function | PROFINET IO RT Controller |
| Communication Protocols | PROFINET IO, PROFIsafe |
| Hardware Interfaces | 2x Industrial Ethernet (Integrated Switch) |
| Transmission Rate | 100000 kbit/s (100 Mbit/s) |
| Degree of Protection | IP20 |
Profinet / EtherNet/IP Deterministic Networks Mapping
The ABB CM579-PNIO implements prioritized frame processing mechanisms to achieve precise transmission alignment with Profinet / EtherNet/IP deterministic networks. The dual internal ports bypass standard commercial routing latency by utilizing a localized media access control architecture, validating consistent scan cycles across the synchronous PLC environment. This processing architecture provides predictable data synchronization profiles even when scaling local I/O density demands on the multi-drop controller network.
Frequently Asked Questions
Q: Does the CM579-PNIO module support active hot-swapping into the AC500 terminal base during runtime?
A: No, this communication module does not allow live insertion or removal. The entire local PLC segment must be de-energized before mounting or decoupling the card to prevent catastrophic data bus interruption or hardware latch-up constraints.
Q: Can both Ethernet interfaces be assigned independent IP addresses on different network subnets?
A: No, the two interfaces are connected through an integrated physical layer switch. They share identical MAC and IP configuration fields, functioning primarily to establish a daisy-chain linear topology without an external switch.
Q: How does firmware flash compatibility affect PROFIsafe safety configurations on this card?
A: Safety validation profiles dictate that any firmware flash adjustments on the controller base match the exact certified revision blocks listed within the safety parameters tool to prevent execution halts or default safe-state activations.
Field Installation Guidelines
The communication card must be locked directly onto the designated slot of the AC500 terminal base before sliding the assembly into place onto a standard, grounded structural DIN-rail. To fulfill standard industrial EMC constraints, connection to the integrated switch ports must utilize category 5e or higher shielded twisted-pair (STP) cabling. The grounding shield of the Industrial Ethernet wiring must hook into the physical frame structure via conductive spring clips. Ensure proper ventilation boundaries by retaining a minimum vertical displacement gap of 25 mm above and below the module face plate to prevent internal heat concentration.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Mastering Modern Industrial Joystick Controls in Heavy Automation
Industrial joysticks play a pivotal role in human-machine interaction across heavy material handling and mobile hydraulics. These tactile controllers translate complex operator movements into precise electrical signals for PLCs, motion controllers, and DCS networks. Consequently, selecting and installing the right joystick architecture ensures operator safety, reduces fatigue, and optimizes equipment performance.
Navigating Industrial Automation Failures: Types, Causes, and Mitigation Strategies
Modern manufacturing relies heavily on automated control systems to maximize throughput and maintain product quality. However, unplanned downtime in industrial automation can cost facility operators thousands of dollars per hour. Understanding how programmable logic controllers (PLCs), distributed control systems (DCS), and field instrumentation fail empowers engineering teams to implement robust preventive maintenance strategies.
Essential Motion Control Commands: A Practical Guide for Engineers
Automation engineers often rely on precise position and speed control to drive modern factory machinery. Modern industrial systems, such as Programmable Logic Controllers (PLCs) and Distributed Control Systems (DCS), depend heavily on standardized motion instructions. Mastering these commands ensures operational safety, protects mechanical components, and optimizes cycle times across production lines.