Product Details
The ABB DSTC 130 57510001-A/2, also cataloged as the DSTC 130 Communication Module, operates as a dedicated hardware component for digital data transmission and system connectivity within ABB industrial control system platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DSTC 130 |
| Part Number | 57510001-A/2 |
| Brand | ABB |
| Product Type | Communication Modules |
| Origin | Sweden |
| Weight | 0.2 kg (0.44 lbs) |
| Dimensions | 100 x 50 x 20 mm |
| Operating Temp | -20 to +60 deg C |
| Power Consumption | 5 W |
| Operating Voltage | 24 VDC |
| Protection Class | IP20 |
| Connector Type | Screw terminals |
| Transmission Rate | Up to 1 Gbps |
Deterministic Network Performance and Firmware Flash Compatibility
The communication circuit assembly processes real-time fieldbus and Ethernet packet switching to deliver high-speed data transmission rates up to 1 Gbps. Built-in firmware flash compatibility allows synchronized protocol stack updates across connected control channels without disrupting local I/O density scaling. Internal filtering circuits isolate the 24 VDC supply lines and screw terminal interfaces against high-frequency backplane bus noise and electrical transients.
Frequently Asked Questions
Q: What power source is required to operate the DSTC 130 circuit board?
A: The board operates on a nominal supply of 24 VDC with a power consumption of 5 W.
Q: How are field wires attached to the DSTC 130 module?
A: Connections are secured directly to the board using integrated screw terminals.
Q: Is the DSTC 130 suitable for installation outside protective enclosures?
A: No, with an IP20 protection rating, the unit must be installed within a protective enclosure or subrack to guard against ingress of dust and moisture.
Field Installation Guidelines
- Disconnect all primary 24 VDC power sources feeding the control chassis before installing or servicing the DSTC 130 circuit board.
- Wear a grounded electrostatic discharge (ESD) wrist strap prior to removing the circuit board from its anti-static packaging.
- Align the 100 x 50 x 20 mm module within its chassis guide rails and secure it into the subrack slot.
- Insert communication and power conductors into the screw terminals and torque them appropriately to establish gas-tight electrical contact.
- Maintain a minimum distance of 200 mm between low-voltage signal cabling connected to the DSTC 130 and high-voltage power conduits to limit electromagnetic interference.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Why Programmable Logic Controllers Drop into Stop Mode: An Expert Analysis
Industrial automation systems rely heavily on Programmable Logic Controllers (PLCs) to maintain uninterrupted production. When a PLC unexpectedly shifts from Run to Stop mode, whole manufacturing lines stall.
As control systems evolve across modern factory automation, understanding the root causes of these interruptions helps engineers minimize costly downtime. This technical guide breaks down why PLCs trip into Stop mode and provides practical strategies to mitigate system faults.
Understanding Root Causes of Unplanned PLC Stop Mode in Industrial Automation
Modern Programmable Logic Controllers manage execution through distinct operational states: Run, Stop, Start-Up, and Hold. During power-up, a controller initializes memory registers within Stop mode before briefly transitioning to Start-Up mode. During this phase, internal self-diagnostics evaluate system integrity across hardware and user programs. If the controller detects no critical faults, it enters Run mode to execute the control program continuously. However, any severe system anomaly forces the CPU back into Stop mode immediately to prevent erratic machine behavior across the plant floor.
Human-Machine Interface Design: Essential Guide to HMI Selection, Visualization, and Control System Integration
Human-Machine Interfaces (HMIs) serve as the primary operational window into complex industrial automation systems. Modern HMIs convert raw machine data into clear graphical displays, enabling operators to oversee entire manufacturing processes in real time. Instead of relying on physical control panels full of hardwired switches, engineers program interactive screens using intuitive graphics, dynamic color coding, and responsive touch interfaces. Over my 15 years in control systems engineering, I have observed HMIs transform from basic display screens into sophisticated command centers that drive operational efficiency across DCS and PLC environments.