Product Details
The Honeywell SC-UCMX01 51307195-175, also cataloged as the SC-UCMX01 Communication Modules, operates as a dedicated hardware component for high-speed protocol processing and serial data routing within Honeywell Experion PKS network infrastructures. It manages bi-directional data flow across multi-drop field networks and subsystem controllers, handling protocol frame conversion and real-time buffer management without overburdening the primary process execution units.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | SC-UCMX01 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.2 kg |
| Dimensions | 9.2 cm x 5.5 cm x 12.8 cm |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | 2700 W |
| Power Supply | 220 V AC |
| Relative Humidity | 5% to 95% non-condensing |
| Mounting Type | DIN-Rail Mounting |
| Supported Protocols | Modbus, Profibus, RS-485, RS-232, CAN |
4-20 mA HART Loop Protocol & Subsystem Connectivity
The Honeywell SC-UCMX01 51307195-175 establishes deterministic interfaces between digital fieldbuses and analog instrumentation networks. Built-in channel-to-channel isolation safeguards the internal controller architecture against common-mode voltage spikes on long RS-485 and CAN communication lines. Integrated line termination and field bus management components maintain packet delivery integrity under heavy industrial electromagnetic interference.
Frequently Asked Questions
Q: What physical communication standards are natively interfaced on the SC-UCMX01 terminal connections?
A: The board directly interfaces with serial RS-232, RS-485, CAN bus, and fieldbus standards including Modbus and Profibus over dedicated physical terminals.
Q: What thermal management rules apply when rail-mounting the module in high-density enclosures?
A: Maintain a minimum vertical clearance of 50 mm above and below the module chassis to facilitate free convection cooling across the -40 to +70 deg C operating temperature spectrum.
Field Installation Guidelines
- Isolate main AC power sources and verify complete voltage discharge before installing or wiring the unit on the DIN rail.
- Snap the housing base onto the standard top-hat DIN rail, pushing down until the spring-loaded locking clip engages securely.
- Ground the shield drain wires of all RS-485, CAN, and fieldbus cables at a single point to prevent ground loop currents.
- Route AC power conductors in separate raceways away from low-voltage RS-232, RS-485, and CAN signal pairs.
- Torque all screw terminal blocks to manufacturer specifications to ensure vibration-resistant electrical connections.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Comprehensive Guide to Noise Types in Industrial Automation and Electronics
Mitigating Emergency Stop Spurious Trips in Industrial Control Systems
Emergency stop (E-Stop) pushbuttons serve as vital safety devices in factory automation and process control plants. Functional safety standards mandate normally-closed (NC) contact blocks to ensure fail-safe operation during wiring breaks or power outages. However, mechanical degradation over time can trigger unexpected spurious trips, halting production lines without an actual emergency. Understanding the underlying causes of mechanical contact failure allows automation engineers to implement robust, fault-tolerant safety circuits.
Redundant Automation Systems: Maximizing Uptime in Critical Control Applications
Industrial automation relies on continuous operational stability to prevent catastrophic downtime and financial loss. While standard dictionary definitions treat redundancy as superfluous, industrial engineers consider redundant control architectures indispensable for high-availability systems. Implementing backup hardware ensures seamless takeover during primary equipment failures, protecting critical infrastructure across manufacturing and process industries.