Product Details
Configured for discrete actuator driving and high-density signal switching in Experion PKS Series 8 platforms, the Honeywell 8C-PDOLA1 (8C-PDOLA1 Digital Output Modules) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 8C-PDOLA1 |
| Brand | Honeywell |
| Origin | USA |
| Operating Temp | -20 deg C to +60 deg C |
| Power Consumption | Not specified |
| Output Type | Digital Output (24 VDC sourcing) |
| Number of Channels | 32 channels |
| Maximum Load per Channel | 100 mA at 24 VDC |
| Environmental Protection | Conformally coated PCB |
4-20 mA HART Loop Protocol & Channel-to-Channel Isolation
The 8C-PDOLA1 controls external field solenoids, relays, and interlock circuits by sourcing 24 VDC at up to 100 mA per channel across 32 discrete output paths. Channel-to-channel isolation architecture prevents ground loops, field noise, and high-voltage inductive surges from interfering with the backplane communication bus. Onboard diagnostics continuously monitor field circuit integrity to detect open-circuit and short-circuit field wiring faults, while a conformally coated PCB prevents atmospheric chemical degradation.
Frequently Asked Questions
Q: Does the 8C-PDOLA1 digital output module support hot-swapping under live power?
A: Yes, the module is engineered for online hot-swappable replacement without interrupting control platform backplane communications or adjacent channel operation.
Q: What protection measures prevent field-side voltage spikes from damaging backplane circuits?
A: Integrated channel-to-channel and channel-to-backplane electrical isolation barriers block transient spikes and ground loops from entering control logic circuits.
Q: What is the load capacity supported on each individual output channel?
A: Each of the 32 discrete output channels delivers up to 100 mA sourcing current at a nominal 24 VDC.
Field Installation Guidelines
- Confirm that ESD prevention protocols are active and wear a grounded wrist strap before handling the 8C-PDOLA1 module.
- Align the module card edges with the designated slot guide rails on the Series 8 I/O terminal assembly (IOTA).
- Insert the unit into the slot until mechanical retaining latches fully seat into the backplane frame.
- Keep 24 VDC digital output signal lines separate from high-voltage AC conductors inside wire duct runs to suppress noise induction.
- Terminate all field cable shield drain wires at a dedicated master cabinet earth ground bar.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Demystifying Programmable Logic Controllers: Comprehensive Guide to PLC Classification and Selection in Industrial Automation
Modern industrial automation heavily relies on Programmable Logic Controllers (PLCs) to drive factory floor efficiency. Over my 15 years as an industrial automation expert working with DCS, TSI, and control systems, I have seen PLCs evolve into the central nervous system of modern manufacturing. Selecting the right controller requires a deep understanding of PLC types based on physical size, hardware architecture, and power supply configurations.
Comprehensive Guide to PLC Types in Modern Industrial Automation
Modern industrial automation relies on programmable logic controllers to govern critical factory operations. System integrators classify PLCs based on scale, hardware architecture, and power supply design. Understanding these core categories enables automation engineers to select the right control system architecture. Consequently, proper hardware selection optimizes performance while minimizing long-term operational costs.
Demystifying the DDE Protocol in Legacy Industrial Automation Systems
Modern control systems rely heavily on seamless interprocess communication to exchange operational data between software programs. Microsoft first introduced the Dynamic Data Exchange (DDE) protocol in 1987 to enable real-time data sharing. In factory automation, DDE served as an early bridge between control software and Windows desktop applications. Therefore, understanding DDE mechanics provides crucial insights into how legacy industrial networks established software-level connectivity.