Product Details
Configured for digital input signal interfacing in Honeywell C300 controller systems, the Honeywell 51306198-100 (51306198-100 Digital Input 24V IOTA Board) provides direct physical/electrical execution. It handles discrete state data collection over a 16-channel layout, accepting field inputs field-configured at either a 24 V DC base level or an alternate 115 V AC potential boundary, routing digitized process states directly across the primary bus architecture.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 51306198-100 |
| Brand | Honeywell |
| Origin | United States |
| Weight | 2 lbs (approx. 0.9 kg) |
| Dimensions | 8.5 x 5.5 x 2.5 inches |
| Operating Temp | Standard industrial operating range |
| Power Consumption | Determined by C300 controller logic card load |
| Channels | 16 digital inputs |
| Input Signal Range | 24 V DC or 115 V AC (configurable) |
| System Compatibility | Honeywell C300 controller platform |
Honeywell DCS Channel-to-Channel Isolation
The module incorporates definitive channel-to-channel isolation metrics across its 16 discrete signal lines. This galvanic barrier schema restricts electrical faults from migrating between adjacent field circuits, ensuring that high-voltage transients on a single 115 V AC loop do not degrade the 24 V DC low-voltage digital signaling logic or cause control bus communication failures inside the C300 processing cluster.
Frequently Asked Questions
Q: Does the 51306198-100 board support live hot-swap replacement during execution?
A: The physical input input/output termination assembly (IOTA) board remains permanently anchored to the cabinet structural support, whereas the active electronic module seated on it permits hot-swap replacement under energized conditions.
Q: How is the channel configuration between 24 V DC and 115 V AC input signals selected?
A: Signal level assignment is governed by specific terminal jumper configurations on the physical hardware block along with corresponding parameter software definitions within the C300 engineering environment.
Field Installation Guidelines
- Position the IOTA board onto the designated mounting carrier within the enclosure, locking the assembly mechanical anchors firmly in place.
- Terminate the 16 discrete input field lines to the terminal blocks, separating 115 V AC conductors from low-voltage DC communication links.
- Attach the dedicated ground braze to the cabinet earth bus to maintain structural shield continuity and minimize external common-mode noise injection.
- Seat the C300 active controller module onto the board connector matrix, verifying structural alignment before executing final latches.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Comprehensive Guide to Noise Types in Industrial Automation and Electronics
Mitigating Emergency Stop Spurious Trips in Industrial Control Systems
Emergency stop (E-Stop) pushbuttons serve as vital safety devices in factory automation and process control plants. Functional safety standards mandate normally-closed (NC) contact blocks to ensure fail-safe operation during wiring breaks or power outages. However, mechanical degradation over time can trigger unexpected spurious trips, halting production lines without an actual emergency. Understanding the underlying causes of mechanical contact failure allows automation engineers to implement robust, fault-tolerant safety circuits.
Redundant Automation Systems: Maximizing Uptime in Critical Control Applications
Industrial automation relies on continuous operational stability to prevent catastrophic downtime and financial loss. While standard dictionary definitions treat redundancy as superfluous, industrial engineers consider redundant control architectures indispensable for high-availability systems. Implementing backup hardware ensures seamless takeover during primary equipment failures, protecting critical infrastructure across manufacturing and process industries.