Product Details
Configured for high-speed network integration within Mark V and EX2000 control platforms, the GE DS200SLCCG3A (DS200SLCC LAN Communication Card) provides direct physical/electrical execution of LAN-based controller communication.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200SLCCG3A |
| Brand | General Electric |
| Origin | USA |
| Dimensions | Standard Mark V PCB footprint |
| Operating Temp | Per Mark V environmental standards |
| Power Consumption | Backplane rail supply |
| Processor | LAN Control Processor (U1) |
| Interface | 16-position alphanumeric display |
Industrial Control and Firmware Compatibility
The DS200SLCCG3A facilitates deterministic data exchange across the Mark V backplane. Proper operation is contingent upon backplane bus communication velocity settings that synchronize the LAN control processor with the driver controller processor (DCP) on the SDCC board. Firmware flash compatibility is managed via replaceable EPROMS (U6, U7), which house the LCP software stack. Any replacement of these memory modules requires strict adherence to checksum validation to ensure data integrity during LCP execution. I/O density scaling is supported through the board's dual-ported RAM (U5) architecture, which regulates the data handshaking between the LAN controller and host drive electronics.
Frequently Asked Questions
Q: How is the LCP software updated on the SLCC board?
A: The LCP software is stored in replaceable EPROMS located at U6 and U7. To update, remove the board, extract the existing EPROMS, and install the new programmed EPROMS into the designated sockets while observing static discharge precautions.
Q: What is the purpose of the connector labeled KPPL?
A: The KPPL connector serves as the interface for the programmer module. This module allows operators to perform diagnostic testing, adjust software parameters, and view fault codes via the 16-position alphanumeric display.
Field Installation Guidelines
- Static Sensitivity: The SLCC board utilizes sensitive CMOS components. Always wear a grounded anti-static wrist strap when handling the PCB to prevent permanent damage to the LCP or memory modules.
- Connector Alignment: Ensure all system-level connections to the NTB/3TB, SDCC, and TCCB boards via the 2PL connector are fully seated. Improper seating of the 2PL or 3PL connectors can cause communication timeouts between the LCP and the SDCC.
- Programmer Module: When mounting the programmer module onto the KPPL connector, apply uniform pressure to ensure the pins are correctly aligned and fully engaged to prevent intermittent diagnostic data.
- Component Verification: Before energizing the cabinet, verify that EPROMS U6 and U7 are oriented correctly according to the notch index on the socket. Reverse installation will result in immediate boot-up failure.
- Grounding: Ensure the board is properly secured to the cabinet chassis via its mounting screws to maintain the integrity of the isolated and non-isolated circuit grounding paths.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Mastering the Siemens PLC Scan Cycle: How the CPU Executes Automation Programs
Industrial automation relies heavily on programmable logic controllers (PLCs) to manage complex manufacturing processes. Many engineers dive straight into programming without mastering the underlying architecture. However, understanding how a PLC CPU executes a program ensures reliable system design. Therefore, mastering the scan cycle optimizes both performance and troubleshooting in modern control systems.
How to Connect to Siemens S7 PLCs: 5 Essential Communication Methods
Establishing a reliable hardware link between a programming terminal and a Siemens SIMATIC controller is essential for engineering workflows. Field engineers rely on distinct physical layers, ranging from legacy serial connections to high-speed Industrial Ethernet protocols. Modern factory automation environments prioritize fast data transfer and seamless driver integration. Selecting the correct connection method simplifies program downloads, online monitoring, and system troubleshooting in complex control systems.
Will PLCs Become Obsolete? The Future of Control Systems in Industry 4.0
Modern manufacturing is undergoing a rapid technological transformation driven by Industry 4.0 innovations. Technologies like Artificial Intelligence (AI), Machine Learning (ML), and the Industrial Internet of Things (IIoT) are dominating discussions across the factory automation sector. Consequently, many engineers wonder if these advanced digital tools will eventually replace traditional Programmable Logic Controllers (PLCs). However, evaluating the core physics of industrial operations reveals a very different reality for control systems.