Product Details
Configured for fieldbus module interconnection and signal transmission in I/A Series DCS networks, the Foxboro AD202MU (AD202MU Cable Assembly) provides direct physical/electrical execution. It establishes point-to-point copper connectivity between baseplate interfaces and termination assemblies.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | AD202MU |
| Brand | Foxboro |
| Origin | USA |
| Weight | 0.45 kg |
| Conductor Type | Shielded Twisted Pair Copper Wiring |
| Interface Connectors | Multi-pin Subsystem Connectors |
| Operating Temp | -20 to +70 deg C |
| Power Consumption | Passive (0 W) |
Channel-to-Channel Isolation & Signal Integrity
The Foxboro AD202MU cable assembly maintains signal integrity across distributed I/O racks by providing high-density shielding that mitigates electromagnetic interference (EMI) and cross-talk. Designed to carry analog, discrete, and 4-20 mA HART loop protocol signals between Fieldbus Modules (FBMs) and field termination hardware, the cable preserves channel-to-channel isolation parameters established at the module baseplate level. Integrated shield drain wires ground induced high-frequency noise directly to the cabinet enclosure structure, preventing signal distortion across process measurement loops.
Frequently Asked Questions
Q: Can the Foxboro AD202MU cable be disconnected or connected while the baseplate is powered?
A: Yes, the cable carries low-voltage field and control signals; however, care must be taken to ensure field devices connected to the loop are in a safe state before physical disconnection.
Q: Is the AD202MU cable rated for installation in harsh industrial cabinet environments?
A: Yes, the cable jacket is constructed with flame-retardant industrial insulation designed to withstand mechanical stress and environmental exposure typical of control rooms and field enclosure cabinets.
Field Installation Guidelines
- Inspect the multi-pin connectors on both ends of the AD202MU cable for straight pins and clean contact surfaces before mating.
- Route the cable through dedicated low-voltage instrument wire ducts, maintaining a minimum clearance of 300 mm from high-voltage AC cables.
- Observe a minimum bend radius of 75 mm during installation to avoid conductor strain and insulation damage.
- Seat connectors completely into the baseplate or termination assembly headers and hand-tighten all retention screws.
- Secure cable shield drain wires to the designated cabinet signal ground bar following single-point grounding practices.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Managed Switch vs. Unmanaged Switch: Industrial Ethernet Architecture
Hot Standby vs. Cold Standby Redundancy in Industrial Automation
System availability determines process safety and productivity in industrial automation. Control engineers deploy redundancy to eliminate single points of failure. This technical guide evaluates Hot Standby vs. Cold Standby architectures, comparing failover speeds, memory sync, cost trade-offs, and field selection criteria.
