Product Details
The 330104-00-16-10-11-00 is an 8 mm proximity probe from the Bently Nevada 3300 XL series, engineered for non-contacting vibration and relative displacement measurement in machinery protection systems. Operating on the eddy current principle, it translates mechanical shaft position variations relative to the probe tip into proportional electrical signals. This specific configuration features a 3/8-24 UNF thread without armor, a 0.0-inch unthreaded length option, a 1.6-inch overall case length, and a 1.0-meter total cable length.
Electrical Performance and Scaling
When paired with a compatible Proximitor Sensor, the probe delivers a scale factor of 7.87 V/mm (200 mV/mil) across a 2.0 mm (80 mils) linear range. Calibration procedures require gap voltage validation targeting a nominal -10 VDC baseline at the electrical center of the linear window, while parallel installations must maintain at least 40 mm of separation to suppress cross-talk.
Mechanical Mounting Guidelines
- Thread the probe body into the mounting bracket or stator block until the tip touches the target shaft, then back off to establish the initial gap.
- Monitor the output voltage via a digital multimeter connected to the Proximitor Sensor terminals until it registers -10.0 VDC.
- Secure the position by tightening the provided hex jam nuts to a maximum torque of 4.5 N m (40 in-lb) to avoid case deformation.
- Route the 1.0-meter integral cable through conduits or dedicated trays while ensuring electrical isolation from structural ground.
| Parameter | Specification |
|---|---|
| Model | 330104-00-16-10-11-00 |
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Thread Scale | 3/8-24 UNF-2A (Without armor) |
| Unthreaded Length Option | -00 (0.0 inches) |
| Overall Case Length Option | -16 (1.6 inches) |
| Total Length Option | -10 (1.0 meter / 3.3 feet) |
| Connector Type | -11 (Miniature coaxial ClickLoc connector, fluid-resistant boot) |
| Agency Approval Option | -00 (No hazardous area approvals required) |
| Probe Diameter | 8 mm |
| Linear Range | 2.0 mm (80 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Operating Temperature | -51 deg C to +177 deg C |
| Weight | 0.18 kg |
| Country of Origin | United States |
Frequently Asked Questions
Q: What does the 1.6-inch case length option designate for this model?
A: The 1.6-inch case length specifies the physical length of the probe housing from the thread start to the rear connector interface, determining the mounting depth required to clear machine casings.
Q: Does this model include hazardous area agency approvals?
A: No, the final suffix -00 indicates that no CSA, ATEX, or IECEx hazardous area approvals are included.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.































