Product Details
The 330102-00-48-05-02-05 is an armored 8 mm proximity probe from the 3300 XL product family, engineered for non-contact vibration and position monitoring in industrial rotating machinery. This eddy-current transducer provides precise shaft displacement measurements while offering enhanced mechanical durability and hazardous-area certifications.
Suffix Breakdown & Configuration
The model code establishes a specific mechanical and electrical configuration within the 3300 XL platform. The base design features an 8 mm probe with a 3/8-24 UNF thread and stainless steel armor. The unthreaded length is 0 mm, and the case length measures 4.8 in.
The integrated cable is 0.5 m (1.6 ft) long, terminating in a miniature coaxial ClickLoc connector with molded protector protection. Additionally, the unit carries CSA, ATEX, and IECEx hazardous-area approvals.
Eddy-Current Operation & Signal Scaling
The probe operates on the eddy-current principle, generating a high-frequency electromagnetic field at the tip to detect gap variations between the sensor and the observed conductive shaft. It provides a linear range of 2 mm (80 mils) with an output sensitivity of 7.87 V/mm (200 mV/mil).
The stainless steel armor and FluidLoc cable design protect against mechanical stress and fluid ingress, maintaining signal integrity in demanding environments. Proper gap voltage validation ensures linearity across the measurement span.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330102-00-48-05-02-05 |
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Tip Diameter | 8 mm (0.31 in) |
| Case Length | 4.8 in |
| Cable Length | 0.5 m (1.6 ft) |
| Connector Type | Miniature coaxial ClickLoc with protector, molded |
| Agency Approval | CSA, ATEX, IECEx |
| Linear Range | 2 mm (80 mils), approx. 0.25 mm to 2.3 mm gap |
| Output Sensitivity | 7.87 V/mm (200 mV/mil) |
| Operating Temperature | -35 deg C to +177 deg C (-31 deg F to +351 deg F) |
| Materials | PPS probe tip, AISI 303/304 stainless steel case |
Field Installation Guidelines
Do not cut or modify the armored probe cable, as factory termination preserves the precise electrical length required for system calibration. Maintain the manufacturer-specified minimum bend radius to prevent alterations to the coaxial geometry.
Route signal cables away from high-frequency switching conductors to minimize induced electrical noise. Ensure the ClickLoc connector is fully seated and locked before energizing the monitoring system, and confirm that installation practices comply with relevant hazardous-area standards.
Frequently Asked Questions
Q: Can the 330102-00-48-05-02-05 probe be hot-swapped during operation?
A: No. Probes must be disconnected only when the monitoring system is de-energized to preserve calibration integrity and prevent electrical transients.
Q: What hazardous area certifications does this probe carry?
A: This model includes CSA, ATEX, and IECEx certifications for safe deployment in classified explosive environments.
Q: How does the armored cable configuration enhance durability?
A: The stainless steel armor protects the coaxial cable from physical wear, mechanical stress, and harsh industrial environmental exposure.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.































