Product Details
The 330101-00-49-90-12-00 is a 3300 XL 8 mm proximity probe engineered for shaft position and vibration monitoring within machinery protection systems. This eddy-current transducer converts shaft displacement into a proportional voltage signal, supporting precise rotor dynamics analysis and mechanical health tracking.
Suffix Breakdown & Configuration
The model number defines a specific mechanical and electrical configuration within the 3300 XL platform. The base designation features a 3/8-24 UNF thread profile without protective armor. The unthreaded length is 0.0 in, while the overall case length measures 4.9 in to accommodate specialized mounting depths.
The integrated cable is 9.0 m (29.5 ft) in length, featuring a FluidLoc cable design combined with a miniature coaxial ClickLoc connector. This standard variant operates without hazardous area agency approvals.
Eddy-Current Operation & Signal Scaling
The probe operates on the eddy-current principle, generating a high-frequency electromagnetic field at the 8 mm tip to measure the gap between the sensor and the conductive shaft. It delivers an output sensitivity of approximately 200 mV/mil across a linear measurement range of 2 mm (80 mils).
During configuration, gap voltage validation targets a reference of approximately -10 VDC to ensure linearity across the span. The FluidLoc cable construction prevents fluid migration through the jacket, protecting electrical integrity in demanding environments.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330101-00-49-90-12-00 |
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF |
| Case Length | 4.9 in |
| Cable Length | 9.0 m (29.5 ft) |
| Connector Type | Miniature coaxial ClickLoc with FluidLoc cable |
| Agency Approval | None |
| Linear Range | 2 mm (80 mils) |
| Output Sensitivity | ~200 mV/mil |
| Applications | Radial vibration, axial position, speed/phase reference |
Field Installation Guidelines
Do not cut or modify the integral probe cable, as factory termination matches the specific electrical length required for system calibration. Maintain the manufacturer-specified minimum bend radius to prevent alterations to the coaxial geometry.
Route signal cables away from high-frequency switching conductors to minimize induced electrical noise. Ensure the ClickLoc connector is fully seated and locked before energizing the monitoring system. Confirm that installation practices align with site standards for fluid-resistant cabling.
Frequently Asked Questions
Q: Can the 330101-00-49-90-12-00 probe be hot-swapped during operation?
A: No. Probes must be disconnected only when the monitoring system is de-energized to preserve calibration integrity and prevent electrical transients.
Q: What is the purpose of the FluidLoc cable design?
A: FluidLoc construction prevents fluid migration through the cable jacket, maintaining stable impedance and long-term signal fidelity in wet or oily environments.
Q: What is the nominal output sensitivity of this probe?
A: The probe provides approximately 200 mV/mil output across its defined 2 mm linear measurement range.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.































