Product Details
The 330101-00-35-10-02-00 is an eddy-current proximity probe designed to measure non-contacting static and dynamic shaft displacement across 3300 XL turbomachinery protection systems. This sensor captures high-frequency electromagnetic variations to deliver raw radial vibration, shaft position, and speed data.
Suffix Breakdown & Configuration
The model code establishes the mechanical and electrical specifications within the 3300 XL platform. The base design features an 8 mm tip with a 3/8-24 UNF threaded barrel without protective armor.
The unthreaded length is 0.0 inches, while the overall case length is 3.5 inches. It includes a 1.0-meter (3.3-foot) integrated standard cable terminated with a miniature coaxial click-lock connector, operating without hazardous area agency approvals.
Eddy-Current Scaling & Signal Processing
The sensing tip relies on factory-calibrated scaling to output a linear voltage slope of 7.87 V/mm (200 mV/mil) when paired with a compatible 3300 XL Proximitor sensor. Mechanical positioning via the threaded casing defines the static air gap, matching a gap voltage validation target of -10 VDC at the linear center point.
Impedance optimization along the coaxial path preserves signal fidelity and ensures cross-talk suppression when dual probes are configured in orthogonal arrangements on a bearing housing.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330101-00-35-10-02-00 |
| Brand | Bently Nevada |
| Origin | USA |
| Weight | 0.31 kg |
| Shipping Dimensions | 15.0 x 15.0 x 5.0 cm |
| Operating Temp | -51 deg C to +177 deg C |
| Power Consumption | Passive Component (Driven by external Proximitor Sensor) |
| Tip Diameter | 8 mm |
| Case Thread Type | 3/8-24 UNF Threaded Barrel |
| Nominal Scale Factor | 7.87 V/mm (200 mV/mil) |
| Linear Sensing Range | 2.0 mm (80 mils) nominal |
Field Installation Guidelines
Do not cut or modify the integral probe cable, as factory termination preserves the precise electrical length required for system calibration. Maintain the manufacturer-specified bend radius to prevent alterations to the coaxial geometry.
Route signal cables away from high-frequency switching conductors to minimize induced electrical noise. Ensure the coaxial click-lock connector is fully seated and isolated using the provided fluorocarbon heat-shrink tubing before energizing the monitoring system.
Frequently Asked Questions
Q: Can the 330101-00-35-10-02-00 probe be hot-swapped during operation?
A: No. Probes must be disconnected only when the monitoring system is de-energized to preserve calibration integrity and prevent electrical transients.
Q: What components are included with the transducer unit box?
A: The package includes the 8 mm probe assembly with an integrated 1.0-meter standard cable and standard fluorocarbon heat-shrink sleeve tubes for termination isolation.
Q: Are associated system components included with this part number?
A: No. Associated 3300 XL Proximitor sensors, extension cables, and mounting brackets are excluded and must be acquired separately.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.































