Product Details
The 330101-00-20-90-12-00 is a 3300 XL 8 mm proximity probe engineered for radial vibration, axial position, and speed or phase reference measurements on fluid-film bearing machinery. This eddy-current transducer converts shaft displacement into a proportional voltage signal, supporting rotor dynamics analysis and mechanical health tracking across demanding operating temperatures.
Suffix Breakdown & Configuration
The model code establishes a specific mechanical and electrical configuration within the 3300 XL platform. The base designation features a 3/8-24 UNF thread without armor protection. The unthreaded length is 0.0 in, while the overall case length is 2.0 in to suit designated mounting depths.
The integrated cable measures 9.0 m (29.5 ft) in length and terminates in a miniature coaxial ClickLoc connector featuring a high-temperature or specialized cable configuration. This standard variant operates without hazardous area agency approvals.
Eddy-Current Operation & Signal Scaling
The probe operates on the eddy-current principle, generating a high-frequency electromagnetic field at the 8 mm tip to detect changes in the gap between the sensor and the conductive shaft. It delivers an output sensitivity of approximately 200 mV/mil across a linear measurement range of 2 mm (80 mils).
During setup, gap voltage validation targets a reference of approximately -10 VDC to maintain linearity across the measurement span. Proper scaling prevents signal distortion and minimizes cross-talk between adjacent channels in multi-probe monitoring setups.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330101-00-20-90-12-00 |
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF |
| Case Length | 2.0 in |
| Cable Length | 9.0 m (29.5 ft) |
| Connector Type | Miniature coaxial ClickLoc, high-temp/specialized cable |
| Agency Approval | None |
| Linear Range | 2 mm (80 mils) |
| Output Sensitivity | ~200 mV/mil |
| Operating Temperature | -40 deg C to +177 deg C (-40 deg F to +351 deg F) |
| Applications | Radial vibration, axial position, speed/phase reference |
Field Installation Guidelines
Do not cut or modify the integral probe cable, as factory termination is matched to the specific electrical length required for system calibration. Maintain the manufacturer-specified bend radius to prevent alterations to the coaxial geometry.
Route signal cables away from high-frequency switching conductors to minimize induced electrical noise. Ensure the ClickLoc connector is fully seated and locked before energizing the monitoring system. Confirm that installation practices comply with site standards for high-temperature cable layouts.
Frequently Asked Questions
Q: Can the 330101-00-20-90-12-00 probe be hot-swapped during operation?
A: No. Probes must be disconnected only when the monitoring system is de-energized to preserve calibration integrity and prevent electrical transients.
Q: How does the probe maintain compatibility with extension cables?
A: It is factory-calibrated and fully interchangeable with standard 3300 XL extension cables and Proximitor sensors without requiring bench recalibration.
Q: What is the operating temperature range for this probe configuration?
A: The sensor operates reliably in ambient conditions ranging from -40 deg C to +177 deg C (-40 deg F to +351 deg F).
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.































