Product Details
The Bently Nevada 330104-00-08-05-02-05 proximity probe is a non-contacting eddy-current sensor for radial vibration and axial position measurement on rotating machinery. Configured with an 80 mm case, M10 x 1 metric thread without armor, 0.5 m total system length, and a miniature coaxial ClickLoc connector, it carries CSA, ATEX, and IECEx hazardous area approvals.
Configuration and Ordering Details
Each segment of the 330104-00-08-05-02-05 part number defines a specific mechanical, electrical, or compliance option within the 3300 XL probe family. The unarmored M10 x 1 threaded housing and 80 mm barrel length establish the physical mounting envelope, while the 0.5 m (1.6 ft) total system length sets the cable run to the mating sensor electronics.
The probe terminates in a miniature coaxial ClickLoc connector and includes CSA, ATEX, and IECEx approvals for hazardous location installations. Verify hazardous area certification class, division, or zone requirements against site permit conditions before installation.
Measurement and Signal Behavior
Operating as a passive transducer powered by a companion Proximitor sensor, the probe works with 3300 XL eddy-current scaling to provide a linear displacement output. During commissioning, gap voltage validation aligns the probe tip to a -10 VDC reference target so radial vibration and axial position readings remain within the linear operating range.
Cross-talk suppression helps preserve signal fidelity when multiple proximity channels are mounted close together on rotating equipment. Maintaining proper spacing and cable routing remains important in multi-channel assemblies where adjacent probes monitor nearby shaft surfaces.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330104-00-08-05-02-05 |
| Brand | Bently Nevada |
| Thread Type | M10 x 1 metric, without armor |
| Case Length | 80 mm |
| Total System Length | 0.5 m (1.6 ft) |
| Connector Type | ClickLoc miniature coaxial |
| Power Supply | Passive (powered by Proximitor) |
| Hazardous Area Approvals | CSA, ATEX, IECEx |
| Operating Temperature | -51 deg C to +177 deg C |
| Weight | 0.14 kg |
| Shipping Dimensions | 11.0 x 1.8 x 1.5 cm |
| Country of Origin | USA |
Frequently Asked Questions
Q: Does the 330104-00-08-05-02-05 proximity probe require external power on its own?
A: No. It is a passive sensor powered by a compatible Proximitor unit within a 3300 XL monitoring channel.
Q: What is the -10 VDC target used for during setup?
A: During commissioning, gap voltage validation uses the -10 VDC reference target to align the probe tip for accurate radial vibration and axial position measurement.
Q: What physical dimensions and cable length apply to this exact part number?
A: This configuration specifies an M10 x 1 thread without armor, an 80 mm case length, and a 0.5 m (1.6 ft) total system length with a ClickLoc miniature coaxial connector.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.































