Product Details
The 330103-00-03-05-12-00 is a 3300 XL 8 mm proximity probe designed for continuous static shaft position and dynamic vibration monitoring in industrial machinery protection systems. This eddy-current transducer converts physical displacement into a proportional voltage signal, supporting accurate rotor dynamics analysis and mechanical health tracking.
Suffix Breakdown & Configuration
The model number incorporates specific configuration codes defining its physical and mechanical construction. The base designation represents the 3300 XL 8 mm proximity probe platform. The unthreaded length is specified as 0 mm, while the case length is 30 mm to accommodate designated mounting clearances.
The integral cable length is 0.5 m, terminated with a miniature coaxial ClickLoc connector featuring Proxpact molded protection for fluid-resistant sealing. This variant carries no agency approval option, aligning with standard installation environments.
Eddy-Current Operation & Signal Scaling
The probe operates on the eddy-current principle, generating a high-frequency electromagnetic field at the probe tip to measure the gap between the sensor and the observed conductive shaft. It delivers an output sensitivity of 200 mV/mil across an 80 mil linear measurement range.
During setup, gap voltage validation targets a reference of approximately -10 VDC to maintain linear response across the measurement span. Proper calibration scaling prevents signal distortion and cross-talk between adjacent channels in multi-probe monitoring configurations.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330103-00-03-05-12-00 |
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Case Length | 30 mm |
| Cable Length | 0.5 m (1.6 ft) |
| Connector Type | Miniature coaxial ClickLoc with Proxpact molded protection |
| Agency Approval | None |
| Linear Range | 80 mils (2 mm) |
| Output Sensitivity | 200 mV/mil |
| System Compatibility | Standard 3300 XL extension cables and Proximitor sensors |
Field Installation Guidelines
Do not cut or shorten the integral probe cable, as factory trimming is matched to the specific electrical length required for system calibration. Maintain the manufacturer-specified minimum bend radius to preserve coaxial cable geometry and characteristic impedance.
Route signal cables away from high-frequency power conductors and motor leads to minimize induced electrical noise. Ensure the ClickLoc connector is fully seated and locked before energizing the monitoring system. Avoid mixing 3300 XL components with NSv or legacy probe systems to prevent impedance mismatch and measurement errors.
Frequently Asked Questions
Q: Can the 330103 probe be hot-swapped during operation?
A: No. Probes and connected loops must be disconnected only when the monitoring system is de-energized to preserve calibration integrity and prevent electrical transients.
Q: How does the probe maintain interchangeability with other system components?
A: It is factory-calibrated and fully interchangeable with standard 3300 XL extension cables and Proximitor sensors without requiring bench recalibration.
Q: What is the nominal output sensitivity of this sensor?
A: The probe provides a standard output sensitivity of 200 mV/mil across its 2 mm linear measurement range.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.































