Product Details
The 330102-00-30-10-02-00 is an armored 8 mm proximity probe belonging to the 3300 XL product family, engineered for continuous vibration and shaft position monitoring in industrial rotating machinery. This eddy-current transducer delivers precise displacement measurements while offering enhanced mechanical cable protection for demanding industrial installations.
Suffix Breakdown & Configuration
The model code designates a specific mechanical configuration within the 3300 XL platform. The base number indicates an 8 mm probe featuring a 3/8-24 UNF threaded barrel with protective armor. The unthreaded length is 0 mm, and the case length measures 3.0 in (76 mm).
The integrated cable measures 1.0 m (3.3 ft) in length and terminates in a miniature coaxial ClickLoc connector with standard cable construction. This standard configuration operates without hazardous area agency approvals.
Eddy-Current Operation & Signal Scaling
The probe operates on the eddy-current principle, generating a high-frequency electromagnetic field at the tip to detect changes in the gap between the sensor and the observed conductive shaft. It provides a linear range of 2 mm (80 mils) with an output sensitivity of approximately 200 mV/mil.
This response supports accurate tracking of both static shaft position and dynamic vibration behavior. Proper gap voltage validation ensures linearity and prevents signal distortion during rotor dynamics analysis.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 330102-00-30-10-02-00 |
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Tip Diameter | 8 mm |
| Thread Size | 3/8-24 UNF |
| Case Length | 3.0 in (76 mm) |
| Cable Length | 1.0 m (3.3 ft) |
| Connector Type | Miniature coaxial ClickLoc, standard cable |
| Agency Approval | None |
| Linear Range | 2 mm (80 mils) |
| Output Sensitivity | ~200 mV/mil |
| Materials | PPS probe tip, AISI 303/304 stainless steel case |
Field Installation Guidelines
Do not cut or modify the armored probe cable, as factory termination preserves the precise electrical length required for system calibration. Maintain the manufacturer-specified minimum bend radius to prevent alterations to the coaxial geometry.
Route signal cables away from high-frequency switching conductors to minimize induced electrical noise. Ensure the ClickLoc connector is fully seated and locked before energizing the monitoring system.
Frequently Asked Questions
Q: Can the 330102-00-30-10-02-00 probe be hot-swapped during operation?
A: No. Probes must be disconnected only when the monitoring system is de-energized to preserve calibration integrity and prevent electrical transients.
Q: Is this probe compatible with standard 3300 XL system components?
A: Yes. It is fully compatible and interchangeable with standard 3300 XL extension cables and Proximitor sensors without requiring bench recalibration.
Q: What is the primary function of the armored cable design?
A: The armored cable provides enhanced mechanical protection against physical wear and harsh environmental conditions in industrial machinery applications.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.































