CON021+PR6426/010-130 | Emerson Epro | Eddy Current Sensor

Configured for high-precision displacement acquisition in rotating machinery, the Emerson Epro CON021+PR6426/010-130 (PR6426/010-130) Eddy Current Sensor system provides direct physical execution of dynamic and static shaft monitoring.

Hardware Specifications

Mechanical Monitoring and TSI Integration

The system utilizes eddy-current induction to measure the clearance between the probe head and a ferromagnetic metallic rotor. Precise rotor dynamics analysis requires accurate eddy-current probe scaling to ensure the conditioned signal maintains a linear relationship with mechanical displacement. During installation, users must perform gap voltage validation, targeting a -10 VDC center point to ensure the sensor operates within its calibrated linear range. Effective cross-talk suppression is maintained by utilizing shielded coaxial cabling between the PR6426 transducer and the CON021 converter, preventing electromagnetic interference from contaminating high-frequency signals required for accurate shaft orbital analysis and vibration frequency response.

Frequently Asked Questions

Q: Can the 13 m cable on the PR6426/010-130 be shortened in the field?

A: No. The CON021 and PR6426 system is factory-calibrated as a matched pair. Modifying the cable length alters the characteristic impedance and resonant frequency, leading to significant measurement inaccuracies.

Q: Is the system compatible with non-ferromagnetic shaft materials?

A: No. The sensor is optimized for 42CrMo4 ferromagnetic steel. Using this sensor on non-ferromagnetic materials will result in a non-linear signal response and reduced measurement sensitivity.

Field Installation Guidelines

1. Probe Mounting: Secure the sensor in a rigid, vibration-isolated bracket to ensure measured displacement is relative to the shaft and not the machine casing.
2. Gap Adjustment: Utilize a calibrated feeler gauge to set the nominal air gap. Ensure the sensor tip is positioned to accommodate the full range of shaft thermal expansion and dynamic movement without mechanical contact.
3. Grounding: Terminate cable shields at a dedicated instrument ground bus. Ensure the CON021 converter housing is properly grounded to mitigate common-mode noise and ground loops.
4. Environment: Ensure the M18x1.5 threads are clean during installation. Use appropriate thread locking compounds if required to prevent vibration-induced loosening during extended operation.