Product Details
The Honeywell FS-SICC-0001/L20, also cataloged as the FS-SICC-0001 System Interconnection Cable, operates as a dedicated hardware component for direct signal pass-through between Safety Manager I/O modules and Field Termination Assemblies (FTAs) within Honeywell Safety Manager architecture.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | FS-SICC-0001/L20 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 2.0 kg (shipping weight) |
| Dimensions | Outer Diameter approx 9.93 mm x 20 m length |
| Operating Temp | -20 to +60 deg C |
| Power Consumption | Passive interconnect assembly (Zero internal power draw) |
| Cable Type | System Interconnection Cable |
| Cable Length | 20 m (indicated by /L20 suffix) |
| Connectors | 1x I/O module connector (end 1), 1x 20-pin FTA connector (end 2) |
| System Compatibility | Honeywell Safety Manager |
Process Control & DCS Signal Interconnection Characteristics
The FS-SICC-0001/L20 cable assembly incorporates channel-to-channel isolation principles to suppress signal cross-talk over long conduit runs. Routing field-side I/O signals across a 20 m distance, the shielded assembly maintains low-attenuation transmission for discrete safety logic and 4-20 mA HART loop protocol field wiring connections. The physical conductor matrix eliminates ground loops between central chassis backplanes and remote field termination racks.
Frequently Asked Questions
Q: Does the FS-SICC-0001/L20 cable support hot-swapping or live disconnect during controller operation?
A: Physical disconnection of the cable during live execution is permitted only in dual-redundant I/O configurations; disconnecting a single-channel cable severs real-time communication between the I/O module and its associated FTA.
Q: What grounding procedure is required for the cable shielding along a 20 m run?
A: The cable shield drain wire must be bonded to the central cabinet safety earth bar at a single termination point to prevent ground potential loops from inducing noise on low-voltage analog signals.
Field Installation Guidelines
- Routing and Bend Radius: Secure the 20 m cable inside dedicated low-voltage instrument raceways or cable trays. Maintain a minimum static bend radius of 60 mm to avoid internal conductor fatigue and shield degradation.
- Connector Alignment: Align the I/O module connector and the 20-pin FTA connector precisely before seating. Tighten all mechanical locking screws to establish a vibration-proof interface.
- Shield Termination: Crimp the shield drain wire with an insulated terminal ferrule and clamp it securely to the master enclosure grounding bar.
- Wiring Separation: Route the system interconnection cable along path channels separated by at least 30 cm from high-voltage AC power cables.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Spatial Computing in Industrial Automation: Elevating PLC and DCS Operations with AR and VR
Industry 4.0 integrates digital intelligence into field operations, transforming factory automation landscapes worldwide. Spatial technologies—specifically Augmented Reality (AR) and Virtual Reality (VR)—redefine how engineers interact with industrial control systems. By bridging computer-generated CAD models with real-time operational technology (OT) data, immersive displays enable intuitive monitoring, rapid diagnostics, and safer maintenance across complex processing facilities.
Master Acceptance Testing: Understanding FAT and SAT in Industrial Control Systems
Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) serve as critical quality assurance gateways in complex industrial control systems. Both procedures verify that programmable logic controllers (PLCs), distributed control systems (DCS), and associated field devices meet strict functional specifications. However, executing these tests effectively requires clear delineation between off-site staging and final field commissioning.
Industrial Networking Essentials: Demystifying Hubs, Switches, and Routers in Control Systems
Industrial automation relies heavily on robust networking infrastructure to connect programmable logic controllers (PLCs), distributed control systems (DCS), and human-machine interfaces (HMIs). Modern factory automation environments generate vast amounts of real-time operational data across deterministic networks. Understanding the structural differences between hubs, switches, and routers ensures optimal traffic segmentation, minimizes latency, and maintains high network availability.