Product Details
The Foxboro P0916DB, also cataloged as the P0916DB Termination Cable, operates as a dedicated hardware component for fieldbus module interface connection and signal routing within I/A Series platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | P0916DB |
| Brand | Foxboro |
| Origin | USA |
| Weight | 0.29 kg (0.65 lbs) |
| Dimensions | Length 1.0 m (Type 1 Cable) |
| Cable Type | Type 1 Prefabricated Termination Cable |
| Operating Temp | -20 to +70 deg C |
| Power Consumption | Passive (0 W) |
| Conductor Configuration | Shielded Multi-Conductor Assembly |
Channel-to-Channel Isolation & Signal Integrity
The Foxboro P0916DB termination cable maintains signal integrity across fieldbus module interfaces by providing continuous copper conductors with heavy shielding to suppress magnetic coupling and cross-talk. Compatible with 4-20 mA HART loop protocol signal paths and discrete I/O wiring, the cable preserves channel-to-channel isolation ratings specified by the attached baseplates and termination assemblies. High-density outer jacketing protects internal conductors from mechanical abrasion and ambient electrical noise in control cabinet layouts.
Frequently Asked Questions
Q: Can the Foxboro P0916DB termination cable be installed or removed while the baseplate is energized?
A: Yes, the P0916DB is a passive interface cable that supports live connection and disconnection, provided the connected field devices do not present inductive load transients during unplugging.
Q: Does the P0916DB cable require specific orientation when mating with termination assemblies?
A: Keyed connector housings prevent reversed pin alignment during physical insertion into baseplate and termination assembly headers.
Field Installation Guidelines
- Inspect connector pins and housing alignment keys on the P0916DB cable prior to installation.
- Route the 1.0 m cable assembly through dedicated low-voltage wire channels, maintaining a minimum 300 mm separation from AC power lines.
- Observe a minimum bend radius of 75 mm to prevent conductor strain and insulation degradation.
- Fully seat connectors into baseplate and termination assembly sockets, tightening thumb screws hand-tight.
- Connect cable shield drains directly to the enclosure signal ground bus bar following single-point grounding rules.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Managed Switch vs. Unmanaged Switch: Industrial Ethernet Architecture
Hot Standby vs. Cold Standby Redundancy in Industrial Automation
System availability determines process safety and productivity in industrial automation. Control engineers deploy redundancy to eliminate single points of failure. This technical guide evaluates Hot Standby vs. Cold Standby architectures, comparing failover speeds, memory sync, cost trade-offs, and field selection criteria.
