Product Details
The Allen-Bradley 800T-FXMQ24RA7, also cataloged as the 800T-FXMQ24RA7 Push Button, operates as a dedicated hardware component for operator interface and status signaling within industrial control panels.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 800T-FXMQ24RA7 |
| Brand | Allen-Bradley |
| Origin | USA |
| Weight | 0.15 kg |
| Dimensions | 30 mm mounting hole |
| Operator Type | Mushroom head (push-pull) |
| Contact Configuration | 1 N.C.L.B. and 1 N.C. block |
| Voltage Rating | 24 VAC/VDC (Dual Input) |
Profinet / EtherNet/IP Deterministic Networks
The 800T-FXMQ24RA7 utilizes standard mechanical contact blocks to interface with local PLC input modules. In systems requiring integration into EtherNet/IP deterministic networks, these contact outputs are wired to remote I/O nodes, where signal states are digitized and transmitted. While the device does not communicate directly via industrial protocols, its deterministic switching behavior is required for reliable operator intervention within I/O density scaling architectures. Firmware flash compatibility is not applicable, as functionality is governed by physical operator engagement and contact closure.
Frequently Asked Questions
Q: Does the dual input feature allow for redundant power sources?
A: The dual input 24 VAC/VDC module allows for connection to two distinct power sources to provide illumination redundancy, ensuring the pilot light remains functional if one supply circuit fails.
Q: Are the contact blocks field-replaceable?
A: Yes. The 800T series contact blocks are modular and can be removed or replaced from the operator assembly to accommodate changes in control logic or to replace worn contacts.
Field Installation Guidelines
- Install the operator into a standard 30 mm panel cutout and tighten the mounting nut to ensure a vibration-resistant seal.
- Verify that the contact blocks are fully snapped onto the operator base before finalizing panel wiring.
- Connect the 24 VAC/VDC power leads to the lamp module terminals, observing correct polarity if required by specific system design.
- Route contact block wiring away from high-voltage AC paths to prevent induced noise or signal interference on the PLC input signals.
- Apply ferrules to all stranded wire terminations to ensure secure mechanical contact within the screw terminals of the contact blocks.
- Perform a functional test of both the illuminated feedback and the electrical switching state after installation to confirm proper integration with the control system logic.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
PLC vs. PAC: Navigating Selection in Modern Industrial Automation
Selecting the right controller is a fundamental decision in industrial automation. While the lines between Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC) often blur, understanding their core architectural differences is essential for system reliability. Both controllers serve as the brain of control systems, yet their specific capabilities dictate their suitability for various factory automation tasks.
Transforming Textile Manufacturing: The Strategic Integration of Industrial Automation and AI
The textile industry stands at a critical technological crossroads. Legacy operations must now embrace digital transformation to remain competitive in a global market. By integrating advanced industrial automation—ranging from PLC-controlled machinery to sophisticated AI-driven analytics—manufacturers can significantly boost productivity, minimize material waste, and elevate overall product quality.
Navigating Industrial Communication Protocols: A Technical Guide for Modern PLCs
In the realm of industrial automation, the Programmable Logic Controller (PLC) serves as the brain of the factory floor. However, its true power is unlocked through robust communication protocols. These digital pathways ensure seamless data exchange between controllers, sensors, and enterprise-level management systems.