Product Details
Configured for high-integrity field signal routing in Honeywell Experion PKS and C300 I/O systems, the Honeywell 50136663-103 (50136663-103 I/O Signal Connection Cable 3000 mm) provides direct physical/electrical execution between input/output modules and field termination assemblies (FTAs).
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 50136663-103 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.85 kg |
| Dimensions | Cable Length: 3000 mm (3.0 meters) |
| Operating Temp | -20 deg C to 70 deg C |
| Power Consumption | Passive Signal Assembly (No Direct Load) |
| Connector Type | Multi-pin Mass Termination Connectors |
| Shielding | Overall Braided Shield with Drain Wire |
| Cable Jacket Material | Flame Retardant PVC / Low Smoke Halogen Free |
| Compatibility | Honeywell C300 I/O Modules & Series C FTAs |
Channel-to-Channel Isolation and Loop Protocol Integration
The Honeywell 50136663-103 interconnect assembly isolates point-to-point analog and digital signal channels against low-frequency ground loops and electromagnetic interference across cabinet interconnect paths. When field I/O processing loops scan 4-20 mA HART loop protocol instruments or low-voltage discrete sensors, the shielded twisted-pair configuration maintains signal attenuation control and channel-to-channel isolation thresholds required for high-density I/O marshalling.
Frequently Asked Questions
Q: Can this 3000 mm signal cable be field-modified or cut to custom lengths?
A: Field cutting is not recommended because factory-molded multi-pin connectors maintain shield continuity and factory-tested contact resistance.
Q: How is the cable shield grounded through the 50136663-103 assembly?
A: The cable shield connects directly through dedicated pin paths within the molded connectors to terminate at the system bus earth ground at the FTA end.
Field Installation Guidelines
- Inspect cable connectors for bent pins or debris prior to mating with the I/O module or FTA headers.
- Route the 3000 mm cable assembly through cabinet cable raceways while respecting the minimum bending radius of 10 times the outer cable diameter.
- Fully seat and latch both terminal connectors to secure the electrical contact points and shield drain wire paths.
- Maintain physical separation between signal connection cables and high-voltage AC power cabling inside the control enclosure.
- Use cable ties to relieve mechanical strain at the panel entry points, ensuring no excessive pull force acts on the connectors.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Static UPS vs. Rotary UPS: Technical Evaluation for Industrial Automation
Comprehensive Guide to Noise Types in Industrial Automation and Electronics
Mitigating Emergency Stop Spurious Trips in Industrial Control Systems
Emergency stop (E-Stop) pushbuttons serve as vital safety devices in factory automation and process control plants. Functional safety standards mandate normally-closed (NC) contact blocks to ensure fail-safe operation during wiring breaks or power outages. However, mechanical degradation over time can trigger unexpected spurious trips, halting production lines without an actual emergency. Understanding the underlying causes of mechanical contact failure allows automation engineers to implement robust, fault-tolerant safety circuits.