Product Details
Configured for motion regulation in industrial control networks, the ABB HAC807A201 (3BHE028767R0201 Control Drive Module) provides direct physical signal execution and real-time process monitoring.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | HAC807A201 |
| Brand | ABB |
| Part Number | 3BHE028767R0201 |
| Weight | 0.2 kg |
| Dimensions | 110 mm x 60 mm x 23 mm |
| Operating Temp | -20 deg C to +70 deg C |
| Power Consumption | 20 W |
| Input Voltage | 24 V DC |
| Protection Class | IP67 |
Profinet / EtherNet/IP deterministic networks
The HAC807A201 utilizes a deterministic backplane bus communication velocity architecture to synchronize control tasks with host processing units. This ensures low-latency execution of motion commands and feedback loops. Firmware flash compatibility is governed by the specific revision of the control platform; users must verify that the system firmware supports the module's register map to avoid communication bus conflicts. The module includes internal self-diagnostic routines that monitor bus signal integrity and output status. If network jitter exceeds threshold limits, the module initiates a hardware-level trap to protect downstream actuators.
Frequently Asked Questions
Q: Does this module support hot-swapping during active drive operation?
A: No. Any hardware removal or insertion must be performed while the system power is completely disconnected to prevent electrical damage to the backplane communication bus and internal logic components.
Q: Is the module firmware field-upgradable?
A: Yes, firmware updates are supported via the host controller interface. Ensure the controller is in a maintenance state before initiating the flash process to prevent data corruption.
Field Installation Guidelines
- Mounting: Given the IP67 protection rating, ensure the module is mounted using the designated enclosure points. Verify that the sealing gasket is clean and free of debris to maintain environmental integrity.
- Grounding: The module chassis must be connected to the cabinet common ground to ensure EMC compliance. Use a low-impedance conductor to minimize noise coupling from high-power drive stages.
- Cable Integrity: Use shielded twisted-pair cabling for all signal connections. Ensure the shield is terminated at the cabinet entry point to suppress electromagnetic interference (EMI).
- Thermal Management: While the unit is designed for a broad temperature range (-20 deg C to +70 deg C), avoid installation near concentrated heat sources that exceed the upper limit to prevent degradation of internal components.
- Wiring Verification: Before applying 24 V DC power, perform a continuity test on input wiring to confirm the absence of short circuits to the chassis.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Choosing the Right Controller: PLC vs. Motion Controller in Industrial Automation
Selecting the optimal control architecture is a foundational decision in industrial automation. Engineers must frequently choose between a Programmable Logic Controller (PLC) and a dedicated Motion Controller. While both systems manage machinery, their underlying design philosophies differ significantly, impacting performance, scalability, and system integration.
Mastering PLC Power Supply Architectures and Operating Voltages
Selecting the correct operating voltage is a critical step in designing reliable industrial automation systems. Whether you are working with a compact PLC or a large-scale DCS, your power architecture dictates the system's longevity. In this guide, we explore the standard voltage ranges and power distribution strategies required to maintain stable factory automation operations.
Optimizing Power Supply Sizing for Industrial Automation Systems
The power supply is the silent heartbeat of any industrial automation system. While engineers often prioritize processors and communication protocols, a stable power architecture remains the most critical factor for long-term reliability. In my 15 years of experience, I have found that neglecting power supply sizing often leads to ghost errors, intermittent field device failures, and costly production downtime.