Product Details
Configured for deterministic industrial networking in Mark VIeS systems, the GE IS420ESWBH5A (IS420ESWBH5A Ethernet Switch) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS420ESWBH5A |
| Brand | GE |
| Origin | USA |
| Weight | Not Specified |
| Dimensions | 18.8 cm x 8.6 cm x 5.6 cm |
| Operating Temp | -40 deg C to +70 deg C |
| Power Consumption | 24/28 VDC |
| Network Ports | 8 x 10/100Base-TX (RJ-45), 2 x 100Base-LX10 (Fiber) |
Industrial Control and Drives Characteristics
The IS420ESWBH5A is optimized for Profinet/EtherNet/IP deterministic networks, maintaining packet delivery timing required for Mark VIeS control synchronization. The switch architecture supports high-velocity backplane bus communication, ensuring that multicast traffic is handled without inducing jitter in I/O scanning cycles. Firmware flash compatibility allows for network performance updates, while the non-interfering safety rating ensures that the switch does not compromise the operational integrity of the connected control hardware.
Frequently Asked Questions
Q: Does this switch support hot-swapping during active system operation?
A: No. While the switch provides network connectivity, removing the unit from the backplane or disconnecting the Phoenix Contact power supply will interrupt network communication to all devices connected through it, resulting in a loss of I/O link for the associated controllers.
Q: Are the fiber ports compatible with standard single-mode and multi-mode infrastructure?
A: The fiber ports are 100Base-LX10. Ensure the installed cable media matches the LX10 specification to avoid signal attenuation or link negotiation failures.
Field Installation Guidelines
- Mounting: Utilize the provided 259B2451BVP4 mounting clip for perpendicular orientation on a DIN rail. Ensure the device is mounted to allow vertical convection cooling, as the unit relies on ambient air circulation.
- Cable Termination: For copper ports, use Cat 5e UTP cabling with RJ-45 connectors. Ensure cable runs do not exceed 100 meters and are routed in separate trays from high-voltage AC lines to prevent induced signal errors.
- Grounding: Secure the device housing to a chassis ground point to ensure compliance with hazardous location (Class 1, Div 2) grounding requirements and to mitigate potential electromagnetic interference.
- Power Connection: Verify the 24/28 VDC supply polarity at the Phoenix Contact connector before application. Improper polarity may damage internal protection circuitry.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
PLC vs. HMI: Distinguishing the Brain from the Interface in Industrial Automation
In the realm of industrial automation, distinguishing between a Programmable Logic Controller (PLC) and a Human-Machine Interface (HMI) is fundamental. While both devices work in tandem, they serve distinct purposes. The PLC acts as the "brain" of the operation, executing logic, whereas the HMI serves as the "eyes," allowing operators to monitor and interact with the system. Understanding this synergy is essential for any professional designing robust factory automation solutions.
Selecting the Right Industrial Automation Solution for Modern Manufacturing
Choosing an effective industrial automation system starts with a thorough process audit. You must identify tasks that are repetitive, labor-intensive, or prone to human error. Not every process requires high-level automation; therefore, prioritize operations that directly impact throughput and quality. By scoping your needs accurately, you avoid over-investing in unnecessary technology. A balanced approach ensures that your capital expenditure aligns with measurable gains in operational efficiency.
Implementing FIFO and LIFO Data Sequencing in PLC Programming
Data management serves as a cornerstone of modern industrial automation. Whether tracking materials on a conveyor or managing batch sequences in a process, engineers frequently rely on sequential logic. Two primary structures—First-In-First-Out (FIFO) and Last-In-First-Out (LIFO)—form the bedrock of this data handling. Mastering these blocks allows programmers to optimize complex machine operations efficiently.