Product Details
The GE DS200SLCCG1AHH, also cataloged as the DS200SLCCG1A LAN Communication Card, operates as a dedicated hardware component for network interfacing and data exchange within Mark V Speedtronic turbine control systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200SLCCG1AHH |
| Brand | General Electric |
| Origin | USA |
| Weight | 1500 g |
| Dimensions | 120 mm x 80 mm x 15 mm |
| Operating Temp | 0 deg C to 70 deg C |
| Power Consumption | < 5 W |
| Core Function | LAN communication and processor interfacing |
Industrial Control & Firmware Compatibility
The DS200SLCCG1AHH integrates a LAN Control Processor (LCP) and utilizes dual-ported RAM (U5) for deterministic data exchange with the Drive Control Processor (DCP) on the SDCC card. The module firmware flash compatibility is restricted to the software stored within the two replaceable EPROMs (U6 and U7); these must match the host controller's revision to ensure stable I/O density scaling and timing. The board employs IEEE 802.3x flow control and supports VLAN tagging to maintain network integrity within the Mark V control environment. Configuration requires verification of backplane bus communication velocity to prevent buffer overflows in the onboard U8/U9 RAM arrays during high-traffic network states.
Frequently Asked Questions
Q: Can this module be hot-swapped while the turbine control system is active?
A: Mark V series communication modules are not designed for hot-swapping. Power must be fully isolated from the rack before installation or removal to prevent electrical transients or corruption of the dual-ported RAM data structures.
Q: What is the purpose of the 16-position alphanumeric display on the module?
A: The display, controlled by the U18 controller, provides localized diagnostic feedback when connected to the programmer module via the KPPL interface, allowing for status monitoring of the LCP boot sequence and network communication health.
Field Installation Guidelines
- Physical Mounting: The module features a low-profile form factor. Ensure it is fully seated in the host rack and that the 3PL interface cable is securely connected to the Drive Control Card (SDCC) to prevent communication time-outs.
- Shielding and Grounding: Utilize the RJ-45 interface in compliance with standard Ethernet physical layer requirements. Ensure the cabinet ground strap is intact, as the card utilizes both isolated and non-isolated circuitry; improper grounding can induce noise into the non-isolated signal paths.
- Memory Handling: When replacing EPROMs (U6/U7), utilize appropriate ESD mitigation tools. Ensure the EPROM orientation aligns with the PCB silk-screen markings to prevent damage to the U1 LCP during the initialization sequence.
- Component Inspection: Periodically verify the integrity of the RJ-45 connector and the 16-position display ribbon cable. Environmental contaminants in the cabinet can lead to oxidation of these contact points, resulting in intermittent network connectivity.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Master Acceptance Testing: Understanding FAT and SAT in Industrial Control Systems
Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) serve as critical quality assurance gateways in complex industrial control systems. Both procedures verify that programmable logic controllers (PLCs), distributed control systems (DCS), and associated field devices meet strict functional specifications. However, executing these tests effectively requires clear delineation between off-site staging and final field commissioning.
Industrial Networking Essentials: Demystifying Hubs, Switches, and Routers in Control Systems
Industrial automation relies heavily on robust networking infrastructure to connect programmable logic controllers (PLCs), distributed control systems (DCS), and human-machine interfaces (HMIs). Modern factory automation environments generate vast amounts of real-time operational data across deterministic networks. Understanding the structural differences between hubs, switches, and routers ensures optimal traffic segmentation, minimizes latency, and maintains high network availability.
Safety Relays in Industrial Automation: Fundamentals, Design Standards, and Fail-Safe Architecture
Safety relays form the bedrock of functional safety in modern factory automation, preventing catastrophic equipment failure and protecting plant personnel. While standard electromechanical relays handle basic load switching, they lack the redundant diagnostics required for high-risk industrial environments. Modern industrial automation platforms—including programmable logic controllers (PLCs) and distributed control systems (DCS)—rely on specialized safety relays to monitor field devices and isolate hazards instantly.