Skip to content

What are you looking for?


You may also like

330101-33-60-10-02-00 3300 XL 8 mm Proximity Probe | Bently Nevada330101-33-60-10-02-00 3300 XL 8 mm Proximity Probe | Bently Nevada330101-33-60-10-02-00 3300 XL 8 mm Proximity Probe | Bently Nevada
330101-33-60-10-02-00 3300 XL 8 mm Proximity Probe | Bently Nevada
330101-33-60-10-02-00 3300 XL 8 mm Proximity Probe | Bently Nevada
330101-33-60-10-02-00 3300 XL 8 mm Proximity Probe | Bently Nevada

330101-33-60-10-02-00 3300 XL 8 mm Proximity Probe | Bently Nevada


Only 10 left - Selling fast

PRODUCT SKU : 330101-33-60-10-02-00

PRODUCT TYPE : Proximity Sensors

PRODUCT VENDOR : Bently Nevada


  • 100% Genuine Parts – Risk-Free 30-Day Returns
  • 1-Year Warranty & Expert Support for Every Order

Product Details

The Bently Nevada 330101-33-60-10-02-00 (also cataloged as the 330101 Proximity Probe) is an 8 mm eddy current proximity probe from the 3300 XL series for non-contacting shaft displacement, static position, and dynamic vibration measurements in a Bently Nevada 3500 Machinery Protection System. This configuration specifies an M10 x 1 threaded case without armor coating, a 33 mm unthreaded case length (code 33), a 60 mm overall case length (code 60), a 1.0 m (approx. 3.3 ft) standard cable with a miniature coaxial ClickLoc connector (codes 10 and 02), and no standard hazardous area certification flags (code 00).

Ordering Configuration and Mechanical Profile

The 330101 base identifies a 3300 XL 8 mm proximity probe with an M10 x 1 metric thread and no armor coating, built with an AISI 303 austenitic stainless steel case and an 8.0 mm nominal tip diameter. Suffix codes 33 and 60 set a 33 mm unthreaded case length and a 60 mm overall case length, while code 10 specifies a 1.0 m (approx. 3.3 ft) cable and code 02 specifies standard cable insulation with a miniature coaxial ClickLoc connector.

Agency approval code 00 indicates no standard hazardous area certification flags for this baseline sub-assembly, so verify plant area classification requirements before ordering. Physical specifications list a weight of 0.14 kg, shipping dimensions of 18.5 cm x 18.5 cm x 5.5 cm, and an operating temperature range of -51 deg C to +177 deg C for the probe head and integral cable.

Signal Scaling, Gap Setup, and Installation Notes

When paired with a calibrated 3300 XL Proximitor Sensor (powered from a -24 VDC nominal loop input), the sensor chain provides a 7.87 V/mm (200 mV/mil) scale factor across a 2.0 mm (80 mils) linear range starting from a 0.25 mm (10 mils) mechanical offset gap, using AISI 4140 steel as the factory calibration target material. During commissioning, technicians monitor the driver DC voltage output and adjust probe-to-target spacing toward -10 VDC to center the operating point on the linear curve and avoid signal clipping during high-amplitude vibration.

Where multiple eddy current probes are mounted close together inside a bearing housing, maintain mechanical spacing to limit cross-talk between adjacent channels. Check physical mounting depth and clearance against the 33 mm unthreaded section and 60 mm overall case length before installation.

Technical Specifications

Parameter Specification
Model 330101-33-60-10-02-00
Brand Bently Nevada
Series / Product Type 3300 XL / 3300 XL 8 mm Proximity Probe
Probe Diameter 8.0 mm nominal
Thread Size M10 x 1 metric thread (without armor coating)
Unthreaded Case Length 33 mm (option 33)
Overall Case Length 60 mm (option 60)
Total Cable Length 1.0 m / approx. 3.3 ft (option 10)
Cable and Connector Miniature coaxial ClickLoc connector, standard cable insulation (option 02)
Agency Approval No standard hazardous area certification flags specified (option 00)
Linear Range 2.0 mm (80 mils), starting at 0.25 mm (10 mils) mechanical offset gap
Scale Factor 7.87 V/mm (200 mV/mil) with calibrated 3300 XL Proximitor Sensor
Target Material Tolerance Factory calibrated using AISI 4140 steel target
Power Supply / Consumption Sourced via paired Proximitor Sensor loop (-24 VDC nominal input)
Operating Temperature -51 deg C to +177 deg C (probe head and integral cable)
Weight 0.14 kg
Shipping Dimensions 18.5 cm x 18.5 cm x 5.5 cm
Origin United States

Frequently Asked Questions

Q: What scale factor and linear range apply to 330101-33-60-10-02-00?

A: When paired with a calibrated 3300 XL Proximitor Sensor, it provides a 7.87 V/mm (200 mV/mil) scale factor over a 2.0 mm (80 mils) linear range starting at a 0.25 mm (10 mils) mechanical offset gap. Calibration is referenced to an AISI 4140 steel target, so verify target material and system matching before commissioning.

Q: What do suffix codes 33, 60, 10, 02, and 00 mean on this probe?

A: Code 33 sets a 33 mm unthreaded case length, code 60 sets a 60 mm overall case length, code 10 specifies a 1.0 m (approx. 3.3 ft) cable, code 02 specifies a miniature coaxial ClickLoc connector with standard cable insulation, and code 00 indicates no standard hazardous area certification flags. Confirm exact mechanical dimensions and area classification requirements against your plant design.

Additional Information

  • 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
  • 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
  • 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
  • Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
  • Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
  • Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.




Recently Viewed Products

Tech & Buying Guide

Technical Insights, Installation Guides, and Buying Tips
Essential Technical Glossary of Electrical Grounding and Bonding in Industrial Automation

Essential Technical Glossary of Electrical Grounding and Bonding in Industrial Automation

In industrial automation, precise grounding terminology prevents catastrophic equipment failure. Therefore, engineers must master the foundational concepts of earth and ground. Earth represents the conductive mass of the planet, providing a zero-potential reference point. Ground defines a deliberate or accidental connection between an electrical circuit and earth. Furthermore, an effectively grounded system maintains low impedance to prevent hazardous voltage buildups during electrical faults.

Read more
Essential Guide to Grounding Electronic Equipment in Industrial Automation

Essential Guide to Grounding Electronic Equipment in Industrial Automation

Industrial automation systems require robust grounding for personal safety and fault clearance. Safety grounding minimizes touch potential across exposed metallic enclosures. It ensures rapid clearance of fuses during electrical faults. However, electronic equipment introduces unique performance requirements. Solid-state devices operate at high speeds. Therefore, they exhibit extreme sensitivity to minor voltage transients. Facility engineers must balance electrical safety with operational signal integrity.

Read more
Engineering Guide to Selecting Electrical Earthing and Grounding Components in Industrial Automation

Engineering Guide to Selecting Electrical Earthing and Grounding Components in Industrial Automation

The overall reliability of any industrial automation network relies heavily on its grounding components. Control systems, PLCs, and distributed control systems (DCS) require rigorous earthing to mitigate electrical noise and faults. Engineers must select each component with extreme care. Furthermore, proper interconnection methods dictate whether a facility operates safely or suffers from chronic signal disruption.

Read more