Product Details
The Honeywell 2MLP-ACF2, also cataloged as the 2MLP-ACF2 Power Supply, operates as a dedicated hardware component for universal line voltage conversion and DC logic power regulation within MasterLogic-200 rack backplanes. Accepts a wide-range free-voltage input of 100 to 240 VAC to generate a regulated 5 VDC output at up to 6 A, supplying operational power to CPU processors, communication interfaces, and discrete or analog I/O expansion modules installed on the local base.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 2MLP-ACF2 |
| Brand | Honeywell |
| Weight | 2 kg (Shipping Weight) |
| Dimensions | Standard MasterLogic-200 Power Slot Width |
| Operating Temp | 0 to 55 deg C |
| Power Consumption | 185 VA Input Apparent Power |
| Input Voltage | 100 to 240 VAC (Free Voltage Range: 110 V / 220 V Nominal) |
| Output Voltage | 5 VDC |
| Output Current | 6 A |
| Frequency Range | 50/60 Hz |
Channel-to-Channel Isolation & DCS Power Stability
The 2MLP-ACF2 provides galvanic isolation between the incoming AC line power terminals, the internal backplane ground, and the downstream 5 VDC logic supply bus. This internal isolation barrier prevents high-voltage AC electrical noise and ground potential fluctuations from propagating into process control loops. The isolation safeguards 4-20 mA HART loop protocol transmitters and multi-channel DCS analog input cards mounted in adjacent rack slots from common-mode noise corruption and power-line transients.
Frequently Asked Questions
Q: What is the maximum DC logic load capacity provided by the 2MLP-ACF2 to the backplane?
A: The module delivers up to 6 A at 5 VDC to the internal backplane bus. Total combined current consumption of the CPU, network modules, and I/O cards installed in the rack must remain within this 6 A threshold.
Q: Does the 2MLP-ACF2 require manual switch selection for 110 VAC vs. 220 VAC operating environments?
A: No, the module incorporates a free-voltage input stage designed to automatically operate across an AC range of 100 V to 240 V without requiring physical jumper changes or selector switch configuration.
Field Installation Guidelines
- Ensure the primary AC main feeder is fully isolated and locked out before wiring line, neutral, and ground conductors to the terminal block.
- Connect the dedicated protective earth ground conductor directly to the chassis ground terminal using a low-impedance copper wire.
- Verify that the combined backplane 5 VDC current requirements of all installed expansion cards do not exceed 6 A.
- Maintain minimum vertical clearances above and below the base unit within the panel enclosure to ensure natural convective cooling airflow.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Optimizing Tank Level Control Using Proportional Algorithms in PLC Systems
Industrial automation engineers frequently encounter liquid level regulation challenges across diverse process plants. Traditional ON-OFF control mechanisms often disrupt system stability due to abrupt actuator switching. Therefore, upgrading to closed-loop architectures like proportional control yields smoother responses. In a typical PLC environment, such as Siemens TIA Portal, engineers utilize closed-loop feedback to minimize process errors without requiring full PID complexity.
Understanding Why Your PLC Enters Stop Mode: Causes and Troubleshooting
In industrial automation, programmable logic controllers (PLCs) serve as the core intelligence of modern factory automation and distributed control systems (DCS). Understanding how a PLC transitions between modes is vital for maintenance engineers. Typically, a PLC operates across four primary modes: Run, Stop, Start-Up, and Hold. When power is applied, the system immediately boots into Stop mode before initiating the Start-Up sequence. If the controller encounters a critical error during execution, it automatically reverts to Stop mode to prevent equipment damage. Therefore, monitoring these state transitions helps technicians maintain high system availability.
Comprehensive Guide to Servo Motor Drive Control Techniques in Industrial Automation
Precision motion control systems drive high-throughput manufacturing across modern industrial automation environments. Unlike standard induction motors running on basic variable frequency drives, servo motor systems deliver sub-millimeter positioning accuracy and fast dynamic response.