Product Details
The Yokogawa PW442-10 serves as the primary PW442 Power Supply Module utilized to execute discrete power transformation and distribution across Yokogawa automation platforms. The unit installs within dedicated cabinets via DIN rail or rack configurations to convert primary input utilities into multi-rail, regulated direct current outputs required by local controller backplanes and adjacent I/O subsystems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | PW442-10 |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 0.3 kg |
| Dimensions | 50 x 140 x 180 mm |
| Operating Temp | 0 to 50 deg C (32 to 122 deg F) |
| Power Consumption | Load-dependent up to rated 100 W capacity |
| Output Voltage | +5 V DC, +24 V DC |
| Output Current | +5 V DC: 10 A, +24 V DC: 2 A |
| Output Capacity | 100 W (typical) |
| Storage Temp | -20 to 60 deg C (-4 to 140 deg F) |
| Relative Humidity | 10 to 90% RH, non-condensing |
| Cooling Method | Passive or forced air depending on system configuration |
| Redundancy Support | Supports dual redundant power supply configuration |
Process Control & Channel-to-Channel Isolation
The module incorporates physical galvanic isolation boundaries to achieve defined channel-to-channel isolation metrics between incoming supply loops and internal processing circuits. This structural separation protects secondary components from transient overvoltages and common-mode electrical noise. By isolating the distinct +5 V DC and +24 V DC rails, the power architecture minimizes high-frequency cross-talk interference, preserving signal fidelity across neighboring 4-20 mA HART loop protocol connections routed through the shared node backplane.
Frequently Asked Questions
Q: How does the dual-rail design allocate its 100 W capacity during peak operations?
A: The module splits output delivery into an internal logic rail (+5 V DC at 10 A max) and a field signaling rail (+24 V DC at 2 A max). Load distributions on either rail must remain within these discrete current thresholds to prevent triggering localized thermal or overcurrent shutdowns.
Q: Under what conditions can this power supply module be hot-swapped while the system is live?
A: Online removal and replacement are supported exclusively when the base unit is wired in a dual-redundant power supply setup containing two parallel modules. Extracting a standalone module from a non-redundant configuration will break the DC bus connection, halting the attached field control processor.
Field Installation Guidelines
- Mechanical Orientation and Mounting: Secure the module onto the chassis DIN rail or rack assembly inside the dedicated enclosure. Ensure the internal retention clips fully engage the mounting structure to mitigate displacement from high-frequency mechanical vibration.
- Separation of Power and Signal Cabling: Route high-voltage primary supply conductors through separate wireways isolated from low-voltage DC lines and digital communication lines to suppress inductive noise coupling.
- Grounding and Earth Shielding: Connect the system rack grounding point directly to the main plant low-impedance copper safety earth network. Terminate all instrumentation shields at the designated cabinet ground bar to prevent earth potential loops from inducing ripple voltages on the output rails.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Why 24V DC Power Supplies Standardize Modern Industrial Automation
Industrial control cabinets worldwide rely on 24V DC as the universal power standard for field instrumentation, sensors, and controllers. Walk into any manufacturing plant, and you will find PLCs, human-machine interfaces (HMIs), and smart actuators running on extra-low voltage DC. Standardizing on 24V DC enhances operational safety, lowers cabinet footprint, and maintains steady control performance across factory networks.
Essential Motion Control Commands: A Practical Guide for Engineers
Automation engineers often rely on precise position and speed control to drive modern factory machinery. Modern industrial systems, such as Programmable Logic Controllers (PLCs) and Distributed Control Systems (DCS), depend heavily on standardized motion instructions. Mastering these commands ensures operational safety, protects mechanical components, and optimizes cycle times across production lines.
Mastering Modern Industrial Joystick Controls in Heavy Automation
Industrial joysticks play a pivotal role in human-machine interaction across heavy material handling and mobile hydraulics. These tactile controllers translate complex operator movements into precise electrical signals for PLCs, motion controllers, and DCS networks. Consequently, selecting and installing the right joystick architecture ensures operator safety, reduces fatigue, and optimizes equipment performance.