Product Details
The ABB 1KHW001356R0004, also cataloged as the 1KHW001356R0004 Universal Digital Power Line Carrier (DPLC) Module, operates as a dedicated hardware component for digital data transmission over physical power line conductors within substation automation and SCADA networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1KHW001356R0004 |
| Brand | ABB |
| Origin | Switzerland |
| Weight | 330 g |
| Dimensions | 144 mm x 88 mm x 40 mm |
| Operating Temp | -40 to 70 deg C |
| Power Consumption | Station bus powered via 24 VDC or 48 VDC input rail |
| Data Rate | Up to 64 kbps |
| Transmission Distance | Up to 32 km |
| Supported Protocols | IEC 61850, DNP3, Modbus |
| Interference Protection | High noise immunity processing |
Backplane Bus Communication Velocity and Firmware Flash Compatibility
The 1KHW001356R0004 DPLC module converts network packets into high-frequency carrier signals without decreasing backplane bus communication velocity across connected controller racks. Integrated physical-layer filtering stabilizes data integrity against high-voltage line noise. Standardized firmware flash compatibility across ABB power line communication platforms maintains synchronized IEC 61850 protocol routing and supports scalable I/O density configurations under dynamic grid switching conditions.
Frequently Asked Questions
Q: What power supply potentials are accepted by the 1KHW001356R0004 module?
A: The module operates from a nominal 24 VDC or 48 VDC power rail connected to the auxiliary supply terminal.
Q: Which communication protocols are natively supported across the DPLC link?
A: The hardware supports transparent data transmission for IEC 61850, DNP3, and Modbus protocol frames.
Q: Is hot-swapping permitted while high-frequency power line carrier signals are present?
A: Control power and line coupling interfaces must be isolated prior to module insertion or removal to protect sensitive receiver input circuits from electrical transients.
Field Installation Guidelines
- Isolate main 24 VDC or 48 VDC control feeds and disconnect line coupling units before installing the module into the chassis.
- Verify that high-frequency line coupling equipment and coaxial shield grounds are tied to the functional earth bus.
- Align the module with chassis card guides and push firmly until edge connectors fully seat into the backplane socket.
- Tighten front retaining fasteners to lock the housing into position and ensure continuous frame grounding.
- Connect communication signal lines and verify protocol link parameters using terminal diagnostic software.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Marshalling Cabinet Preventive Maintenance: Essential Healthiness Checks for PLC, DCS, and ESD Systems
Marshalling cabinets serve as the vital interface between field instrumentation and control room electronics in modern process facilities. Regular preventive maintenance of these cabinets ensures signal integrity across programmable logic controllers (PLCs), distributed control systems (DCS), and emergency shutdown (ESD) networks. System technicians must execute structured inspection protocols to mitigate environmental risks, identify loose wiring, and maintain continuous operational readiness.
Spatial Computing in Industrial Automation: Elevating PLC and DCS Operations with AR and VR
Industry 4.0 integrates digital intelligence into field operations, transforming factory automation landscapes worldwide. Spatial technologies—specifically Augmented Reality (AR) and Virtual Reality (VR)—redefine how engineers interact with industrial control systems. By bridging computer-generated CAD models with real-time operational technology (OT) data, immersive displays enable intuitive monitoring, rapid diagnostics, and safer maintenance across complex processing facilities.
Master Acceptance Testing: Understanding FAT and SAT in Industrial Control Systems
Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) serve as critical quality assurance gateways in complex industrial control systems. Both procedures verify that programmable logic controllers (PLCs), distributed control systems (DCS), and associated field devices meet strict functional specifications. However, executing these tests effectively requires clear delineation between off-site staging and final field commissioning.