Product Details
Configured for 100BASE-T data transmission in Experion PKS networks, the Honeywell 51305482-105 (51305482-105 Ethernet Cable) provides direct physical execution for industrial automation nodes.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 51305482-105 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 13.6 lbs (6.17 kg) |
| Dimensions | Factory standard assembly length |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | Passive cabling assembly |
| Cable Type | 100BASE-T Ethernet |
| Connector Type | RJ45 |
| Jacket Material | Polyvinyl chloride (PVC) with foil shielding |
| Conductor Structure | 4 twisted pairs, solid core with XLPE insulation |
| Pull Strength | Up to 70 kg (150 lbs) |
4-20 mA HART Loop & Channel-to-Channel Isolation Characteristics
The foil-shielded 4 twisted pair construction mitigates high-frequency noise and electromagnetic interference across industrial communications. Maintaining consistent impedance across conductor pairs preserves channel-to-channel isolation when running along control cabinets and field wireways adjacent to 4-20 mA HART loop signal cabling. This low-capacitance design minimizes cross-talk, protecting deterministic Ethernet packet transfer from signal degradation caused by neighboring analog I/O wiring.
Frequently Asked Questions
Q: Does physical disconnection of the 51305482-105 cable support hot-swapping during active operation?
A: Yes, physical hot-swap disconnection is supported, provided network logic accounts for temporary loss of communication on the affected network segment.
Q: What grounding procedure should be used for the integrated foil shield?
A: The foil shield drain wire must terminate at the designated panel ground terminal on one end to avoid ground loop currents while suppressing high-frequency interference.
Q: What precautions prevent physical damage during cable routing?
A: Do not exceed the maximum pull strength rating of 70 kg (150 lbs) and maintain standard minimum bend radius guidelines during installation to prevent conductor deformation.
Field Installation Guidelines
- Inspect the PVC outer jacket and RJ45 connectors for physical defects before installation.
- Route the cable through dedicated low-voltage wireways, maintaining separation from high-voltage AC power distribution.
- Observe minimum bend radius limits during pull-through to protect the internal XLPE insulation and solid core conductors.
- Ensure RJ45 connector latches seat fully into the target interface port with a firm tactile click.
- Verify proper drain wire grounding at the termination cabinet according to system layout specifications prior to commissioning.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Why Programmable Logic Controllers Drop into Stop Mode: An Expert Analysis
Industrial automation systems rely heavily on Programmable Logic Controllers (PLCs) to maintain uninterrupted production. When a PLC unexpectedly shifts from Run to Stop mode, whole manufacturing lines stall.
As control systems evolve across modern factory automation, understanding the root causes of these interruptions helps engineers minimize costly downtime. This technical guide breaks down why PLCs trip into Stop mode and provides practical strategies to mitigate system faults.
Understanding Root Causes of Unplanned PLC Stop Mode in Industrial Automation
Modern Programmable Logic Controllers manage execution through distinct operational states: Run, Stop, Start-Up, and Hold. During power-up, a controller initializes memory registers within Stop mode before briefly transitioning to Start-Up mode. During this phase, internal self-diagnostics evaluate system integrity across hardware and user programs. If the controller detects no critical faults, it enters Run mode to execute the control program continuously. However, any severe system anomaly forces the CPU back into Stop mode immediately to prevent erratic machine behavior across the plant floor.
Human-Machine Interface Design: Essential Guide to HMI Selection, Visualization, and Control System Integration
Human-Machine Interfaces (HMIs) serve as the primary operational window into complex industrial automation systems. Modern HMIs convert raw machine data into clear graphical displays, enabling operators to oversee entire manufacturing processes in real time. Instead of relying on physical control panels full of hardwired switches, engineers program interactive screens using intuitive graphics, dynamic color coding, and responsive touch interfaces. Over my 15 years in control systems engineering, I have observed HMIs transform from basic display screens into sophisticated command centers that drive operational efficiency across DCS and PLC environments.