Product Details
The GE DS200TCEBG1A, also cataloged as the DS200TCEB Protective Termination Expander Board, operates as a dedicated hardware component for signal routing and terminal expansion within Mark V turbine control platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200TCEBG1A |
| Brand | GE General Electric |
| Origin | USA |
| Dimensions | Standard Mark V PCB footprint |
| Operating Temp | Per Mark V environmental standards |
| Power Consumption | Passive signal path component |
| Interface Connectors | 1 x 26-pin, 4 x 10-pin, 3 x 20-pin |
| Mechanical Mounting | 8-point screw securement |
Industrial Control and Firmware Compatibility
The DS200TCEBG1A serves as a signal conditioning and termination interface for the Mark V control rack. Unlike processor-heavy modules, this board functions as a passive expansion assembly featuring signal transformers and voltage-limiting components (resistors, diodes, capacitors) to protect the underlying control electronics. As this module does not contain programmable microprocessors or PROM modules, it does not require firmware flash compatibility or backplane bus communication velocity settings. It is designed to scale I/O connectivity for complex drive assemblies without adding computational overhead to the host controller.
Frequently Asked Questions
Q: Does the board require software or hardware configuration?
A: No. The DS200TCEBG1A is a passive termination expander board. It contains no user-configurable jumpers or switches, and requires no software parameter entry for operation.
Q: How many mounting points are provided for installation?
A: The board is designed with 8 screw holes to ensure mechanical stability given the weight of the onboard transformers and connectors. All 8 screws must be utilized to prevent vibration-induced fatigue.
Field Installation Guidelines
- Documentation: Before disconnecting any cables, label every ribbon cable and wiring harness with its corresponding connector ID (e.g., JKX, JMP, JPU). This is critical for preventing misconnection during the re-installation phase.
- Component Retention: When removing the securing screws, ensure the board is supported with one hand to prevent the PCB from dropping into the drive interior. If any hardware (screws/washers) falls into the drive, it must be retrieved immediately to prevent potential electrical shorts or mechanical interference.
- Connector Integrity: Inspect all connectors (JKX/Y/Z, JMP, JVA, etc.) for bent pins or debris before mating. Ensure cables are fully seated and latched to maintain signal integrity.
- Mounting: Tighten all 8 mounting screws evenly to ensure the PCB remains flat against the standoffs, preventing mechanical stress on the board or its mounted components.
- Safety: Confirm that the drive system is fully de-energized and capacitors are discharged before removing or installing the board to prevent accidental short circuits or electrical shock.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Why 24V DC Power Supplies Standardize Modern Industrial Automation
Industrial control cabinets worldwide rely on 24V DC as the universal power standard for field instrumentation, sensors, and controllers. Walk into any manufacturing plant, and you will find PLCs, human-machine interfaces (HMIs), and smart actuators running on extra-low voltage DC. Standardizing on 24V DC enhances operational safety, lowers cabinet footprint, and maintains steady control performance across factory networks.
Essential Motion Control Commands: A Practical Guide for Engineers
Automation engineers often rely on precise position and speed control to drive modern factory machinery. Modern industrial systems, such as Programmable Logic Controllers (PLCs) and Distributed Control Systems (DCS), depend heavily on standardized motion instructions. Mastering these commands ensures operational safety, protects mechanical components, and optimizes cycle times across production lines.
Mastering Modern Industrial Joystick Controls in Heavy Automation
Industrial joysticks play a pivotal role in human-machine interaction across heavy material handling and mobile hydraulics. These tactile controllers translate complex operator movements into precise electrical signals for PLCs, motion controllers, and DCS networks. Consequently, selecting and installing the right joystick architecture ensures operator safety, reduces fatigue, and optimizes equipment performance.