Product Details
Configured for high-speed motor and drive regulation in Mark V control systems, the GE DS200SDCCG4A (DS200SDCCG4A Controller Board) provides direct physical execution of drive control, motor control, and co-motion processing tasks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200SDCCG4A |
| Brand | GE (General Electric) |
| Origin | USA |
| Operating Temp | Standard industrial range |
| Microprocessors | 80C186 (DCP), 80C196 (MCP), TMS320C25 (CMP) |
| Memory | 4 x EPROM, 1 x EEPROM |
Backplane Bus Communication and Deterministic Processing
The DS200SDCCG4A utilizes three distinct 16-bit microprocessors interconnected via dual-ported RAM (DPR) to ensure deterministic communication across the Mark V backplane. The Drive Control Processor (DCP) handles system-level operations, while the Motor Control Processor (MCP) manages inner-loop current regulation. For computationally intensive tasks, the Co-motion Processor (CMP) employs a TMS320C25 digital signal processor. Firmware flash compatibility is managed through onboard EPROM sockets, with site-specific calibration parameters stored within the U9 EEPROM. Precise address decoding and DMA control are maintained to ensure stable backplane bus communication velocity during complex ac/dc motor drive sequences.
Frequently Asked Questions
Q: Are the memory chips (EPROM/EEPROM) hot-swappable during system operation?
A: No. Memory chips located in the sockets must be replaced only while the card is powered down. Hot-swapping these components while the drive is active will cause immediate control failure and potential corruption of configuration data.
Q: How is the CMP processor utilized within the SDCC architecture?
A: The CMP (U35) is enabled only for motor control algorithms requiring processing power exceeding the capabilities of the MCP. It interfaces exclusively with its dedicated dual-ported RAM and EPROM to maintain high-speed execution of math-intensive control loops.
Field Installation Guidelines
- Ensure the control system is fully de-energized before inserting or removing the DS200SDCCG4A card from the Mark V cabinet rack.
- Verify that all jumper settings on the replacement board match the original configuration before installation to prevent conflicts in I/O scaling.
- Handle the board by the edges or the faceplate to avoid electrostatic discharge (ESD) damage to the microprocessors and memory chips.
- After installation, confirm that the EEPROM (U9) contains the correct site-specific parameters, as the new board will not be pre-configured with the specific tuning constants of the drive it is replacing.
Additional Information
- 100% Genuine Parts: All products are original and authentic, ensuring reliable industrial performance.
- 30-Day Refund Guarantee: Return any in-stock item within 30 days in original, unopened packaging for a full refund (excluding shipping and fees).
- 12-Month Warranty: Covers defects in materials or workmanship; excludes misuse, normal wear, or unauthorized modifications.
- Worldwide Shipping: We ship via USPS, UPS, FedEx, and DHL. Delivery times vary by country and may be subject to customs or import fees.
- Support & Contact: Technical and warranty assistance is available anytime. Contact us here: Contact.
- Purchase Guidance: Check product specifications and compatibility carefully before ordering to ensure proper application.
Tech & Buying Guide
Why 24V DC Power Supplies Standardize Modern Industrial Automation
Industrial control cabinets worldwide rely on 24V DC as the universal power standard for field instrumentation, sensors, and controllers. Walk into any manufacturing plant, and you will find PLCs, human-machine interfaces (HMIs), and smart actuators running on extra-low voltage DC. Standardizing on 24V DC enhances operational safety, lowers cabinet footprint, and maintains steady control performance across factory networks.
Essential Motion Control Commands: A Practical Guide for Engineers
Automation engineers often rely on precise position and speed control to drive modern factory machinery. Modern industrial systems, such as Programmable Logic Controllers (PLCs) and Distributed Control Systems (DCS), depend heavily on standardized motion instructions. Mastering these commands ensures operational safety, protects mechanical components, and optimizes cycle times across production lines.
Mastering Modern Industrial Joystick Controls in Heavy Automation
Industrial joysticks play a pivotal role in human-machine interaction across heavy material handling and mobile hydraulics. These tactile controllers translate complex operator movements into precise electrical signals for PLCs, motion controllers, and DCS networks. Consequently, selecting and installing the right joystick architecture ensures operator safety, reduces fatigue, and optimizes equipment performance.